All-In-One epoxy concrete repair mortar, 5–25 kg

Concrete Repair

Epoxy Concrete Repair Mortar 5kg, 10kg or 25kg - All-in-One Pothole Kit

Three-part all-in-one epoxy concrete repair mortar in 5kg, 10kg and 25kg kits that cures stronger than concrete for potholes, steps, ramps and surface repairs.

SKU RCD1270

£63.88 incl. VAT

Key features

  • Cures stronger than concrete
  • Heavy duty formula, suitable for high traffic
  • Easy to mix and apply
  • Surface usable in 24 hours
  • Impervious and dust free
  • Three part system
  • Includes a free mixing tub (1 mixing bucket supplied per order)
Colour: Light Grey
Size: 5kg | Coverage approx. 0.6m² at 5mm Thickness

Product details

Product description

This all-in-one epoxy repair mortar is the ultimate patch material for repairing concrete. With a finish harder than concrete itself and extreme long-life durability, it is ideal for almost any concrete patch or repair job – repairing steps, fixing pot holes in damaged roads, industrial work spaces, or even securing bedding anchors and railing posts. Complete with resin, activator and aggregate, each kit gives you everything needed for a professional finish on almost any concrete surface.

The three-part formula has been designed with the end user in mind, so the job can be done quickly with a professional finish. Easy application makes it a great choice for DIY users, while it keeps the strength, quality and reliability professionals need, with great chemical resistance and anti-slip properties for industrial and commercial environments. Manufactured in the UK, its resin components give a highly durable, incredibly resilient finish that withstands heavy traffic and lasts for many years.

Kit Quantities
5kg Sizes 10kg Sizes 25kg Sizes
1 x Part A (Resin) 1 x Part A (Resin) 1 x Part A (Resin)
1 x Part B (Hardener) 1 x Part B (Hardener) 1 x Part B (Hardener)
1 x Part C (5kg aggregate) 1 x Part C (10kg aggregate) 1 x Part C (25kg aggregate)
1 x Small Mixing Bucket 1 x Flexi Mixing Bucket 1 x Flexi Mixing Bucket

Please note: 1 mixing bucket is supplied per order. Weights are given for the whole product, split between Part A, Part B and Part C.

Coverage
  • 5kg: approximately 0.6m² at 5mm thickness
  • 10kg: approximately 1.2m² at 5mm thickness
  • 25kg: approximately 3m² at 5mm thickness
Preparation

The damaged concrete should be at least 28 days old. Thoroughly clean any hole or defective concrete with a wire brush, removing laitance, dust, grease, oil and existing coatings, then vacuum away any remaining dust or dirt. Whatever the condition of the substrate, priming with Epoxy Resin Tack Coat is recommended – it seals the surface and ensures a good bond to the mortar, and should be used especially where there is an excess of loose material. The base should have a relative humidity of 75% or lower, a minimum strength of 25N/mm² and a residual moisture content below 6%.

Mixing & Application

An ambient temperature of at least 7°C is advised; apply only in dry conditions between 5°C and 25°C.

  1. Using a slow-speed 1200W+ electric paddle mixer, mix Part A on its own for about 2 minutes until homogeneous. Add ALL of Part B and mix for another 2 minutes, keeping the paddle submerged to avoid mixing air into the unit.
  2. Decant into a larger mixing vessel (30L for the 25kg size). Gradually add the aggregate (Part C) and mix for a further 2-3 minutes until the desired consistency is reached. Mixing too fast traps air; adding all of Part C at once gives a sandcastle-like consistency – for a wetter mix, don't add all of Part C.
  3. Apply the mixed unit immediately, using a steel float or trowel to spread, shape and compact the mortar into place. Cordon off the area for safety and to prevent it being walked on while curing.
  4. For a perfect, smooth finish, regularly wipe the trowel with a cloth dampened with white spirit as you apply.
  5. Once applied, protect from the weather and leave to cure for 12-24 hours at 20°C before the area is trafficable.

The pot life is 30 minutes at 20°C: once activated, the product starts to chemically cure and becomes unworkable after this time, so remove it from the tin within this window. It will remain workable on the surface for 40 minutes. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply the product before it becomes unworkable. Wear appropriate PPE such as gloves and protective safety goggles; if the product contacts skin, wash off immediately with plenty of soap and water and seek medical advice if discomfort occurs.

Cure Times
  • Paint-over time: 16-24 hours at 10°C; 8-12 hours at 20°C
  • Car traffic time: 24-48 hours at 10°C; 12-24 hours at 20°C
  • Industrial traffic time: 72 hours at 10°C; 48 hours at 20°C
  • Full chemical cure: 5 days at 20°C
Please Note
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • Do not apply on new or wet concrete (under 28 days old or with a residual moisture content of 6% or higher).
  • Do not apply below 5°C or store in freezing conditions; temperatures below 20°C will slow curing and drying times. In industrial freezers, this product will not cure below -3°C, however long it is left.
  • Do not expose to chemicals, wash or allow water to rest on the surface until 7 days after application.
  • Do not expose to prolonged sunlight – this product is not UV stable and will discolour.

Specifications

Size
5kg, 10kg, 25kg
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Sky Blue, Leaf Green, Tomato Red, Jet Black, Natural
Appearance
Concrete-like smooth finish in a range of colours
Composition
Epoxy mortar mix
Substrates
Concrete, cementitious screeds, timber, some asphalt surfaces
Product Components
Resin (Part A) + Activator (Part B) + Aggregate (Part C)
Typical Installations
Pot hole repair, surface filling and repair prior to painting or coating, step/ramp repair
Application Thickness
5-50mm (can be feather edged at 5mm)
Coverage (at 5mm thick)
Up to 0.6m² per 5kg
Pot Life (at 20°C)
30 minutes
Working Life
40 minutes
Re-coat/Foot-traffic Time (at 20°C)
8-12 hours
Drying Time (at 20°C)
12-24 hours
Tensile Strength
>15MN/m²
Compressive Strength
>50MN/m²
Adhesion
>2MPa (N/mm²)
Minimum Temperature
5°C
Application Tools
Flexi mixing bucket, trowel, white spirit and cloth for the trowel
Usage Location
Interior/exterior
Shelf Life
12 months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Epoxy Concrete Repair Mortar 5kg, 10kg or 25kg - All-in-One Pothole KitLight Grey / 5kg | Coverage approx. 0.6m² at 5mm Thickness

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy