10KG Acid Resistant Repair Mortar for Concrete

Concrete Repair

Acid Resistant Concrete Repair Mortar 10kg - 3 Part Epoxy, Fast Cure

10kg three-part acid resistant epoxy repair mortar for permanent repairs to acid or chemical damaged concrete – approx. 1.2m² at 5mm thick.

SKU RCD427

£262.92 incl. VAT

Key features

  • Chemical resistant – even to sulphuric acid
  • Incredibly durable, cures harder than concrete
  • Easy to apply
  • Quick curing
  • Impervious and dust free
  • Heavy duty and suitable for high traffic
Size: 10kg | Coverage approx. 1.2m² at 5mm Thickness

Product details

Product description

Ideal for permanent repairs to acid-damaged concrete, this mortar can be painted over in just 6-8 hours at 20°C, making it great for urgent, time-critical repairs. Exceptionally resilient, it cures harder than concrete for a long-lasting finish and gives excellent chemical resistance – even to sulphuric acid.

A specialised, high-performance product for repairing damaged concrete where acid or chemical exposure is common, it combines exceptional strength with a smooth, concrete-like finish, and is impervious, dust free, heavy duty and suitable for high traffic. It stands up to the harsh conditions found in breweries, chemical plants and other facilities with high acid and chemical exposure, making it a dependable long-term solution for maintenance and repair teams.

Coverage
  • 5kg: approximately 0.6m² at 5mm thickness
  • 10kg: approximately 1.2m² at 5mm thickness
Preparation

The concrete should be at least 28 days old and free of laitance, dust, grease, oil and existing coatings. Clean any holes or defective concrete thoroughly with a wire brush and vacuum away all remaining dust and dirt. The base should have a relative humidity of 75% or lower, a minimum strength of 25N/mm² and residual moisture below 6%. For particularly weak, dusty or flaking surfaces, or where there is a lot of loose material, prime with tack coat to seal the surface and ensure a good bond.

Mixing & Application

Apply only in dry conditions at ambient temperatures between 5°C and 25°C, and cordon off the area so it is not walked on while curing.

  1. Using a slow-speed 1200W+ electric paddle mixer, mix Part A on its own for about 2 minutes until homogeneous. Add ALL of Part B and mix for another 2 minutes, keeping the paddle submerged to avoid mixing in air.
  2. Decant into a larger mixing vessel (15L for a 10kg mix, such as a flexi tub), then slowly add the filler (Part C) and mix for 3 minutes until you reach the consistency you want. Mixing too fast traps air, and adding all of Part C at once gives a sandcastle-like consistency – for a wetter mix, do not add all of Part C.
  3. Apply the mixed unit immediately, trowelling it evenly and compacting it into place with a steel float or trowel.
  4. For a perfectly smooth finish, regularly wipe the trowel with a cloth dampened with white spirit as you work. Apply at 5-50mm thickness; it can be feather-edged at 5mm.
  5. Once applied, protect from the weather and leave to cure before trafficking.

Pot life is 30 minutes at 20°C – once mixed, all product must be removed from the tin and applied within this window. It stays workable for up to 40 minutes.

Cure Times
  • Paint-over: 12-16 hours at 10°C, 6-8 hours at 20°C
  • Car traffic: 24-48 hours at 10°C, 16-24 hours at 20°C
  • Industrial traffic: 48-72 hours at 10°C, 24-36 hours at 20°C
  • Full chemical cure: 2 days at 20°C
Useful Information
  • Do not split the product. Taking smaller quantities from each tin, even if measured correctly, can cause activation problems.
  • In industrial freezers, the mortar will not cure below -3°C, however long it is left.
Please Note
  • Do not apply on new or wet concrete (under 28 days old, or with a residual moisture content of 6% or higher).
  • Do not apply below 5°C or expose to freezing conditions; temperatures below 20°C slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until 7 days after application.
  • Not UV stable – do not expose to prolonged sunlight, as it will discolour.
  • Wear suitable PPE such as gloves and safety goggles. If the product gets on skin, wash off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Specifications

Size
10kg (Part A + Part B + Part C)
Appearance
Smooth, concrete-like finish
Composition
Epoxy repair mortar with chemical resistance properties
Substrates
Concrete, cementitious screeds, timber, some asphalt surfaces
Product Components
Resin (Part A) + Activator (Part B) + Aggregate/Sand (Part C)
Typical Installations
Repairing damaged concrete in breweries, chemical plants and other areas of acid or chemical exposure
Coverage
Up to 0.6m² per 5kg at 5mm thick (approx. 1.2m² per 10kg)
Thickness
5-50mm, can be feather-edged at 5mm
Pot Life
30 minutes
Working Life
40 minutes
Re-coat/Foot-traffic Time (at 20°C)
6-8 hours
Drying Time (at 20°C)
16-24 hours
Tensile Strength
>15MN/m²
Compressive Strength
>50MN/m²
Adhesion
>2MPa (N/mm²)
Minimum Temperature
5°C
Application Tools
Flexi mixing bucket, trowel, white spirit and cloth
Usage Location
Interior/exterior
Shelf Life
12 months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Acid Resistant Concrete Repair Mortar 10kg - 3 Part Epoxy, Fast Cure

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy