Write-on Wipe-off Wall Paint 1kg Whiteboard Coating

Masonry & Wall Paint

Whiteboard Wall Paint 1kg - Write On Wipe Off Polyurethane Coating

1kg two-part write-on, wipe-off wall paint that turns any marked-out wall area into a bespoke whiteboard, covering 7-8m² per coat.

SKU RCD1080

£137.58 incl. VAT

Key features

  • Produce your own bespoke whiteboard at a fraction of the cost
  • Easy to apply – two coats recommended, superb coverage up to 8m² per 1kg
  • Very tough coating, washable with regular board wipes
  • Available with an antibacterial option
  • Solvent free and rapid curing
Size: 1kg | Coverage 7-8m² per coat
Antibacterial: Yes

Product details

Product description

Developed to replace whiteboards – bespoke boards are expensive and alternatives soon become permanently marked – this chemical-resistant, high-solids, UV-stable polyurethane wall coating creates a whiteboard-like surface you can draw on with whiteboard-friendly marker pens and wipe clean after use. Design the board size yourself: simply mark out the area, apply the coating and let the tough coating cure, then use it like a normal whiteboard with no fixtures or fittings needed. Produce your own bespoke board at a fraction of the cost.

Solvent free, rapid curing, washable with regular board wipes and available with an antibacterial option, it is typically used in schools and educational spaces, training rooms, meeting and planning rooms, stores, home playrooms and studies, and can be applied indoors and outdoors.

Coverage

1kg: 7-8m² per coat. Two coats are advised in most cases; coverage depends on porosity, and more porous surfaces may need further coats.

Preparation

Old paint finishes should be removed if they are flaking at all, and the surface sanded to create a mechanical key. Concrete must be at least 21 days old and/or have a residual moisture content below 6%, and be clean and free from dust, laitance, grease, oil, curing compounds and existing paint finishes. Make good blow holes and defective concrete with a reliable repair compound such as our All-in-One Epoxy Concrete Repair Mortar. Once fully abraded, sweep and vacuum away all dust and contaminants.

Mixing & Application

The ambient temperature must be above 7°C when applying.

  1. Mix Part A on its own with a mixing paddle on an electric drill for about 1 minute, then pour in ALL of Part B (small tin) and mix for another 90 seconds until a uniform colour is achieved and the curing agent has fully dispersed, keeping the paddle in suspension to avoid mixing in air.
  2. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  3. Begin applying immediately with a nylon-bonded, resin-suitable roller or brush, cross rolling for an even application with minimal roller marks until coverage is uniform. If you need more than one tin, have the second prepared and ready before you finish the first – a second pair of hands helps.
  4. Use a brush around the edges to cut in.
  5. Apply the second coat after a minimum of 12 hours and a maximum of 24 hours.
  6. Allow the second coat to cure for at least 48 hours before using the wall as a whiteboard; avoid water and cleaning substances until fully chemically resistant.

The pot life is 20 minutes at 20°C – remove the paint from the tin within this window – and it stays workable for up to 40 minutes. 100% of the mixed material must be used in a single application and cannot be stored. Temperatures below 20°C slow curing.

Safety: irritating to skin and eyes and may cause skin sensitisation or an allergic skin reaction; harmful if inhaled and may cause respiratory irritation; flammable liquid and vapour; toxic to aquatic organisms with possible long-term effects. Always wear gloves, suitable footwear, safety goggles and clothing to prevent skin contact, and suitable respiratory protection in low ventilation. If on skin, wash off immediately with plenty of soap and water; if in eyes, rinse cautiously with water for several minutes, removing contact lenses if easy to do; if inhaled, move to fresh air and rest. Seek medical attention if discomfort continues or breathing becomes difficult. Dispose of packaging in line with local, regional, national and international regulations.

Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • For best cleaning results, use a whiteboard cleaning spray.
Please Note
  • Do not apply to wet or uncured concrete surfaces.
  • Do not apply at 7°C or below, and do not expose to freezing conditions.

Specifications

Size
1kg unit (Part A + Part B)
Antibacterial
Available with or without
Appearance
White, whiteboard-like matt finish (two coats)
Composition
Chemical resistant, high solids polyurethane, solvent free
Substrates
Bare concrete, wood, screeds, steel
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Training room walls, planning rooms, education spaces, meeting rooms, stores
Mixed S.G.
1.1
Coverage
7-8m²/kg/coat
Recommended Coats
2
Pot Life (at 20°C)
20 minutes
Pot Life (at 10°C)
40 minutes
Tack Free Time (at 20°C)
6 hours
Re-coat Time
12-24 hours
Hard Dry Time (at 20°C)
12-24 hours
Full Chemical Resistance (at 20°C)
48-72 hours
Ready to Use as Whiteboard
Minimum 48 hours after the second coat
Adhesive Strength to Concrete
3.9 N/mm²
Adhesive Strength to Steel
>12 N/mm²
UV Stability
Stable
Application Tools
Rollers, brush
Usage Location
Indoors and outdoors
Storage Temperature
10°C - 25°C, dry conditions

Quote request

Get a quote for this product

Whiteboard Wall Paint 1kg - Write On Wipe Off Polyurethane Coating1kg | Coverage 7-8m² per coat / Yes

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy