Epoxy Floor Paint 10kg High Gloss Chemical Resistant

Floor Paint

Epoxy Warehouse Floor Paint 1kg to 10kg - High Build Forklift Grade Gloss

High build, 100% solids two-part epoxy warehouse floor paint for forklift and vehicle traffic, in 1kg, 2.5kg, 5kg and 10kg packs and 13 colours.

SKU RCD729

£83.98 incl. VAT

Key features

  • Heavy duty – suitable for forklift and vehicle traffic
  • High build, 100% solids epoxy resin
  • Tough, easy-to-clean professional high gloss finish
  • Excellent abrasion and oil resistance
  • Surface usable in 24 hours
  • Designed for heavy storage solutions
  • Roller applied – suitable for in-house projects
  • Superb coverage
  • Solvent-free and low VOC, resin and hardener included
Colour: Light Grey
Size: 1kg | Coverage 3-4m² per coat

Product details

Product description

Protect and upgrade your warehouse floor with this British-made, two-part epoxy resin coating. Designed with industrial warehousing in mind, it creates a tough, smooth, long-lasting high gloss finish that is easy to clean, with excellent abrasion resistance and durability under regular foot, vehicle, pallet truck and forklift traffic. It is a practical choice for warehouse aisles, stockrooms, workshops, picking and packing areas, dispatch centres, storage units and trade premises.

  • Built for busy floors: a heavy-duty protective surface for demanding industrial environments where staff, pallet trucks, forklifts and other equipment move constantly.
  • High build, 100% solids: a solvent-free epoxy resin rather than a water-based floor paint – the resin and hardener cure together to form a substantial protective coating over properly prepared concrete.
  • Sealed, easy-to-clean surface: bare concrete generates dust and is hard to keep clean; this coating seals it with a smooth surface that is easier to sweep, clean and maintain, and resists oil spills once fully cured.
  • Professional finish: choose from a range of colours, which can also help distinguish working zones, storage areas and pedestrian routes when combined with line markings.
  • Suitable for in-house application: applied by roller and brush with pre-weighed resin (Part A) and curing agent (Part B), so there are no mixing ratios to calculate – suitable for professional installers and businesses with the equipment and experience to carry out their own floor maintenance.
  • Made in Britain: formulated, manufactured and tested in the UK.

It is designed for indoor concrete floors in commercial and industrial working environments, from individual stockrooms to large warehousing and distribution facilities. Unlike ordinary concrete paint, its two-part, 100% solids formulation chemically cures into a substantial protective coating built for regular foot, equipment and vehicle traffic rather than just a decorative finish.

Coverage
Pack Size Coverage per Coat Packs for Two Coats
1kg 3–4m² 2 x 1kg
2.5kg 8–10m² 2 x 2.5kg
5kg 17–20m² 2 x 5kg
10kg 35–40m² 2 x 10kg

We recommend one coat of the appropriate primer (sold separately) followed by two coats of paint. Multiply floor length by width in metres for your area: a 5m x 6m storage area (30m²) needs two 10kg packs – one complete pack per coat – while a 70m² floor needs two 10kg packs per coat at the lower end of the coverage range, or four 10kg packs in total. Coverage depends on the texture and condition of the concrete; rough or porous floors use more paint, so plan with the lower end of the range.

Cure Times
Stage At 20°C At 10°C
Recoating Between Epoxy Coats 8–12 hours 16–24 hours
Forklift / Industrial Traffic 48 hours after final coat 72 hours after final coat
Full Chemical Cure 7 days Allow longer in cooler conditions

These timings do not include surface preparation, repairs or primer curing, and actual times depend on the temperature and conditions of the working area.

Preparation

The concrete must be sound, clean and free from dust, dirt, loose material, laitance, oil and other contamination. Remove any flaking paint, and repair holes and defective concrete with a repair mortar before coating. Mechanical preparation such as grinding or shot-blasting is preferred for the best adhesion, as it creates a textured mechanical key for the epoxy. For suitable bare concrete, our Concrete Etch and Clean is an alternative – it is for bare concrete only and is not a substitute for mechanically preparing a painted floor. Steel surfaces should be shot or grit blasted to a nominal Sa 2.5 Swedish standard. Existing coatings must be assessed first: remove loose or flaking paint and make sure what remains is sound and securely bonded. Once preparation is complete, sweep and vacuum thoroughly.

Priming

Choose the primer that matches your concrete; it supports adhesion but does not replace cleaning, preparation or repairs:

Follow the primer's own instructions and plan so the first coat of paint goes on within its re-coating window – no longer than 24 hours after the primer has cured or is dry to touch.

Mixing & Application

You will need an epoxy-suitable roller and frame, fresh roller sleeves for each coat, brushes for edges, a plastic paint scuttle or tray, a mixing paddle and suitable electric drill, and protective gloves, clothing and eye protection. Primer and tools are sold separately. On larger areas, plan how many people will apply the coating, have enough tools and sleeves, clear the area, and plan your route so you never walk back across fresh epoxy.

  1. Gently stir Part A for 2 minutes with a mixing paddle on an electric drill to disperse the pigment, then add ALL of Part B and mix until the colour and texture are uniform and the curing agent has fully dispersed, keeping the paddle below the surface to avoid introducing air.
  2. Transfer the mixed epoxy into a plastic paint scuttle or tray and start applying immediately with a roller and Epoxy Resin Roller Sleeve.
  3. Work methodically down the floor, cutting in around edges, corners and details with a brush and cross rolling for an even, smooth finish. Several applicators make it easier to mix, cut in and roll each pack within its working time.
  4. Organise everything before mixing: pot life is about 20 minutes, after which the paint becomes unworkable in the tin, and working time on the floor is up to 40 minutes.
  5. Once the first coat reaches the re-coat stage, apply the second coat with freshly mixed complete packs and new roller sleeves, no longer than 24 hours after the first coat has cured.
  6. Let the coating cure before reopening the space to traffic.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Please Note
  • Do not split packs between coats – once Part A and Part B are mixed the epoxy starts curing and the complete unit must be used; it cannot be saved for later.
  • Do not apply on new or wet concrete – concrete must be at least 28 days old with residual moisture below 6%, and must have a damp proof membrane beneath the slab.
  • Do not apply below 7°C or expose to freezing conditions while curing. Temperatures below 20°C will slow curing and drying times.
  • Do not expose to water, washing or chemicals for the first 7 days while it reaches full chemical cure at 20°C; cooler conditions may need longer.
  • For indoor use only and NOT UV stable – prolonged sunlight will cause discolouration. For indoor areas with regular sunlight, top coat with a coloured UV-stable finish such as our Chemical Resistant UVR Floor Paint.
  • This is a high build coating, not a self-levelling screed – it follows the prepared surface, so repair or level holes, cracks and uneven areas first.
  • The standard finish is smooth high gloss, suitable for many generally dry warehouse and storage areas. For extra texture and slip resistance, see our Anti-Slip Epoxy Floor Paint in fine, medium and coarse grades, chosen to suit floor conditions, contamination and use.

Specifications

Size
1kg, 2.5kg, 5kg, 10kg (Part A + Part B – weight is for the whole pack)
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Light Ivory, Sky Blue, Leaf Green, Fern Green, Tomato Red, Golden Yellow, Vermillion, Jet Black, White
Appearance
Smooth, High Gloss Finish
Composition
100% Solids
Substrates
Bare Concrete, Wood, Screeds, Steel
Product Components
Epoxy Resin (Part A) + Activator/Curing Agent (Part B)
Typical Installations
Warehousing, industrial flooring, storage rooms, stock rooms, workshops, etc.
Solvent Content
Solvent Free, Low VOC
Thickness
250 Microns/Coat
Consumption Rate
0.25-0.30kg/m²
Coverage
Up to 4m²/kg
Recommended Coats
2
Pot Life
20 Minutes
Working Life
40 Minutes
Re-coat Time (at 20°C)
8-12 Hours
Drying Time (at 20°C)
12-24 Hours
Car Traffic Time (at 20°C)
12-24 Hours
Car Traffic Time (at 10°C)
24-48 Hours
Minimum Temperature
7°C
Application Tools
Epoxy roller sleeve and frame, brushes
Usage Location
Interior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Epoxy Warehouse Floor Paint 1kg to 10kg - High Build Forklift Grade GlossLight Grey / 1kg | Coverage 3-4m² per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy