Chemical resistant UVR floor paint, 2.5kg, aliphatic polyurethane

Floor Paint

Chemical Resistant UVR Floor Paint 2.5kg - UV Stable Polyurethane Topcoat

2.5kg highly chemical resistant, UV-stable two-part polyurethane floor paint in matt or gloss and 13 colours, covering 15-20m² per coat.

SKU RCD1162

£258.56 incl. VAT

Key features

  • Two part system
  • UV stable
  • Excellent chemical resistance
  • Easy to clean, spill resistant
  • Available in high gloss or matt
  • Surface usable in as little as 24 hours
  • Superb coverage rates
  • Anti-slip option available as a second top coat
Colour: Light Grey
Size: 2.5kg | Coverage 15-20m² per coat
Finish: Matt

Product details

Product description

This high solids, pigmented aliphatic polyurethane floor coating combines UV stability with excellent chemical resistance and hard-wearing performance in a wide range of applications. Lab tested to withstand chemical spills and other liquid damage, it is extremely durable yet easy to clean and maintain, and is commonly used as a UV-stable top coat over heavy duty industrial floor paints such as our Factory Floor Paint for extra chemical resistance.

A growing number of UK breweries use it because it resists erosion and flaking when exposed to alcohol-based spills, and its easy-clean finish saves time on day-to-day upkeep. Despite its industrial strength it is easy enough for non-experts to apply. Typical installations include exterior concrete, pharmaceutical flooring, chemical storage areas, toilet and changing room floors and sealing epoxy floors.

Slip Resistance

Independently tested to BS7976/2 (pendulum test values and slip potential):

Finish Dry Wiped Wet
Gloss 74.67 (Low) 22.00 (High)
Satin 70.00 (Low) 34.33 (Moderate)
Matt 65.00 (Low) 49.67 (Low)
Coverage

2.5kg: 15-20m² per coat. In most cases 2 coats are advised.

Preparation

The concrete must be clean and free from dust, laitance, oil etc. Old paint finishes should be removed if they are flaking at all, and the surface sanded to create a texture (a mechanical key). Mechanical preparation (shot-blasting or grinding) is preferred and gives the best results; if that is not possible, sanding or our Concrete Etch and Clean is a good alternative (bare concrete only). Make good pinholes and defective concrete with a repair mortar or other relevant repair products, and shot or grit blast steel to a nominal Sa 2.5 Swedish standard. Sweep and vacuum away all remaining dust.

Priming
Mixing & Application

The ambient temperature should be at least 7°C when applying.

  1. Mix Part A on its own with a mixing paddle on an electric drill for about 1 minute, then add ALL of Part B and mix for another 90 seconds until the curing agent has fully dispersed, keeping the paddle in suspension to avoid mixing in air.
  2. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  3. Begin applying immediately with a nylon-bonded, resin-suitable roller and resin roller sleeve, cross rolling levelled areas for an even, smooth finish and working down the floor towards the exits; use several people on large areas.
  4. Use a brush around the edges to cut in (a second pair of hands is useful).
  5. Re-coat as soon as the first coat has started curing and is no longer tacky to touch.
  6. The cured final coat is fine for foot traffic.

A typical system is 1 coat of the relevant primer and 2 coats of paint: apply the first coat no longer than 24 hours after the primer has cured or is dry to touch, and the second no longer than 24 hours after the first has cured. The pot life is 30 minutes – remove the paint from the tin within this window – and it stays workable on the floor for 60 minutes. 100% of the mixed material must be used in a single application. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply it before it becomes unworkable.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • There may be colour differences between this product and our epoxy floor paints.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • This product is NOT self levelling.
Please Note
  • Do not apply on new or wet concrete (under 21 days old, or with a residual moisture content of 6% or higher); concrete must have a damp proof membrane beneath it for polyurethane coatings.
  • Do not apply below 7°C or expose to freezing conditions. Temperatures below 20°C slow curing and drying.
  • Do not expose to chemicals, wash or allow water to rest on the surface until 4 days after application (full chemical cure).

Specifications

Size
2.5kg (Part A + Part B – weight is for the whole pack)
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Light Ivory, Sky Blue, Leaf Green, Fern Green, Tomato Red, Golden Yellow, Vermillion, Jet Black, White
Finish
Smooth matt or gloss
Composition
Pigmented aliphatic polyurethane resin, high solids
Substrates
Bare concrete, wood, screeds, steel
Product Components
Polyurethane resin (Part A) + Activator (Part B)
Typical Installations
Exterior concrete, pharmaceutical flooring, chemical storage areas, toilet and changing room floors, sealing epoxy floors, etc.
Thickness
100 microns/coat
Coverage
Up to 8m²/kg
Recommended Coats
2
Pot Life
30 Minutes
Working Life
60 Minutes
Re-coat Time (at 20°C)
6 Hours
Re-coat Time (at 10°C)
12-16 Hours
Drying Time (at 20°C)
12-24 Hours
Car Traffic Time (at 20°C)
12-24 Hours
Car Traffic Time (at 10°C)
24-48 Hours
Industrial Traffic Time (at 20°C)
48 Hours
Industrial Traffic Time (at 10°C)
72 Hours
Full Chemical Cure Time (at 20°C)
4 Days
Minimum Temperature
7°C
UV Stability
Stable
Application Tools
Roller sleeve and frame, brushes
Usage Location
Interior/Exterior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Chemical Resistant UVR Floor Paint 2.5kg - UV Stable Polyurethane TopcoatLight Grey / 2.5kg | Coverage 15-20m² per coat / Matt

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy