Car Park Decking System 5kg - Premium Polyurethane Finish

Floor Paint

Car Park Decking Paint 5kg - Polyurethane Floor Coating for Vehicles

5kg damp tolerant, flexible two-part polyurethane decking system for car parks and other high-vehicle areas, in 13 gloss colours.

SKU RCD652

£326.78 incl. VAT

Key features

  • Waterproof and resistant to vehicle spills
  • Solvent-free polyurethane resin system
  • Easy to clean and maintain
  • Highly durable, long lasting system
  • Widely used across the UK
  • Available in a wide range of gloss colours
Colour: Light Grey
Size: 5kg | Coverage up to 15m² per coat

Product details

Product description

This damp tolerant, flexible polyurethane resin system is formulated for car parks and other areas with heavy vehicle use, with added abrasion and impact resistance to last in a car park environment. It is a two-part waterproof sealing paint in a standard colour range, used to give floors a durable, waterproof protective coating, and is widely used across the UK in service stations and public car parks.

It is a cost-effective way to achieve a premium decked finish in a car park or vehicle storage area. Designed in the UK by a team of resin chemists and flooring installers, the formula is tested and refined for longevity and ease of installation. The system can also be made anti-slip on request for extra safety in walkway areas, and it works with Car Park Line Marking Paint to mark out parking bays or pathways.

Coverage

5kg: up to 15m² per coat. In most cases 2 coats are advised.

Preparation

The concrete must be clean and free from dust, laitance, oil etc. Old paint finishes should be removed if they are flaking at all, and the surface sanded to create a texture (a mechanical key). Mechanical preparation (shot-blasting or grinding) is the preferred treatment and always gives the best results; if that is not possible, sanding or our Concrete Etch and Clean is a good alternative (Etch and Clean is only suitable for bare concrete). Pinholes and defective concrete should be made good with a repair mortar. Steel surfaces should be shot or grit blasted to a nominal Sa 2.5 Swedish standard. Once fully abraded, sweep and vacuum away all remaining dust or contaminants.

Priming

A relevant primer should be used, especially on new or oil-contaminated concrete:

Mixing & Application

The ambient temperature should be at least 7°C when applying.

  1. Mix Part A on its own with a mixing paddle on an electric drill for about 1 minute, then add ALL of Part B and mix for another 90 seconds until a uniform colour and texture is achieved and the curing agent has fully dispersed. Keep the paddle in suspension to avoid mixing air into the unit.
  2. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  3. Begin applying immediately with a roller and Epoxy Resin Roller Sleeve, using a consistent, thorough method. Cross roll flat areas for an even, smooth finish, working down the floor until complete. Large areas may need several people.
  4. Use a brush around the edges to cut in (a second pair of hands is useful for this stage).
  5. Re-coat as soon as the first coat has started curing and is no longer tacky to touch.
  6. The cured final coat is fine for foot traffic.

A typical system is 1 coat of the relevant primer followed by 2 coats of this decking system. Apply the first coat no longer than 24 hours after the primer has cured or is dry to touch, and the second coat no longer than 24 hours after the first coat has cured.

The pot life is 20 minutes: once the parts are mixed the product starts to chemically cure, so remove it from the tin within this window. It then stays workable on the floor for 40 minutes. 100% of the mixed material must be used in a single application and cannot be stored for later use. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply the product before it becomes unworkable.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product is NOT UV stable and can discolour when exposed to regular sunlight. For areas with plenty of repeated sunlight, top coat with a coloured UVR coating such as our Chemical Resistant UVR Floor Paint for a UV stable finish.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • This product is NOT self levelling.
Please Note
  • Do not apply on new or wet concrete.
  • Do not apply at temperatures below 7°C and do not expose to freezing conditions.
  • Temperatures below 20°C will slow curing and drying times.
  • Do not expose to chemicals, wash or allow water to rest on the surface for 48 hours after application.

Specifications

Size
5kg (Part A + Part B – weight is for the whole pack)
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Light Ivory, Sky Blue, Leaf Green, Fern Green, Tomato Red, Golden Yellow, Vermillion, Jet Black, White
Appearance
Smooth, Medium Gloss Finish
Composition
Polyurethane System
Substrates
Bare Concrete, Wood, Screeds, Steel
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Car parks, factories, vehicle storage areas, chemical plants, warehousing, etc.
Solvent Content
Solvent Free
Thickness
250 microns
Consumption Rate
0.3-0.4kg/m²
Coverage
Up to 3m²/kg
Recommended Coats
2
Pot Life
20 Minutes
Working Life
40 Minutes
Re-coat Time (at 20°C)
8-12 Hours
Re-coat Time (at 10°C)
16-24 Hours
Drying Time (at 20°C)
12-24 Hours
Car Traffic Time (at 20°C)
12-24 Hours
Car Traffic Time (at 10°C)
24-48 Hours
Industrial Traffic Time (at 20°C)
48 Hours
Industrial Traffic Time (at 10°C)
72 Hours
Full Chemical Cure Time (at 20°C)
3 Days
Minimum Temperature
7°C
Application Tools
Rollers, Brushes
Usage Location
Exterior & Interior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Car Park Decking Paint 5kg - Polyurethane Floor Coating for VehiclesLight Grey / 5kg | Coverage up to 15m² per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy