Antibacterial epoxy floor paint, 2.5–10 kg

Floor Paint

Antibacterial Epoxy Floor Paint 2.5kg to 10kg - MRSA Effective

Heavy-duty antimicrobial epoxy floor paint, effective against MRSA, fungi and mould, in 2.5kg, 5kg and 10kg packs and 13 colours.

SKU RCD993

£147.98 incl. VAT

Key features

  • Antimicrobial protection for the life of the coating
  • Effective against MRSA
  • Destroys other microorganisms such as fungi and mould
  • 100% solids, professional gloss finish
  • Incredibly durable and easy to clean
  • Oil tolerant
  • Surface usable in 24 hours
  • Low VOC and solvent free
Colour: Light Grey
Size: 2.5kg | Coverage 8-10m² per coat

Product details

Product description

This heavy-duty, 100% solids epoxy resin is ideal for highly trafficked floors where hygiene is paramount and strict hygiene standards must be met. Made in the UK and supplied as pre-weighed epoxy resin (Part A) and curing agent (Part B), it gives a durable, high gloss finish that protects and decorates concrete, steel and other substrates and lasts for many years. Typical applications include garages, factories, industrial storage areas, basements and other areas needing hygienic floors.

Independently tested, it gives fast, effective antimicrobial protection for the lifetime of the coating, helping keep floors hygienic and reducing the risk of cross-contamination. Where an antibacterial coating only prevents the growth of bacteria, this antimicrobial coating goes further, destroying bacteria as well as a wide range of microbes such as fungi and mould. It minimises staining and bad odours, is easy to clean and maintain, and is 5x thicker than cheaper alternatives for a highly durable finish.

Coverage
  • 2.5kg: 8-10m² per coat
  • 5kg: 17-20m² per coat
  • 10kg: 35-40m² per coat

In most cases 2 coats are advised.

Preparation

The concrete must be clean and free from dust, laitance, oil etc. Old paint finishes should be removed if they are flaking at all, and the surface sanded to create a texture (a mechanical key). Mechanical preparation (shot-blasting or grinding) is preferred and gives the best results; if that is not possible, sanding or our Concrete Etch and Clean is a good alternative (bare concrete only). Make good pinholes and defective concrete with a repair mortar, and shot or grit blast steel to a nominal Sa 2.5 Swedish standard. Sweep and vacuum away all remaining dust.

Priming

A relevant primer should be used, especially on new or oil-contaminated concrete:

Mixing & Application

The ambient temperature should be at least 7°C when applying.

  1. Gently stir Part A for 1-2 minutes with a mixing paddle on an electric drill to disperse the pigment, then add ALL of Part B and mix for another 90 seconds until the colour and texture are uniform and the curing agent has fully dispersed, keeping the paddle in suspension to avoid mixing in air.
  2. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  3. Begin applying immediately with a roller and Epoxy Resin Roller Sleeve, cross rolling levelled and flat areas for an even, smooth finish and working down the floor towards the exits; use several people on large areas.
  4. Use a brush around the edges to cut in (a second pair of hands is useful).
  5. Re-coat as soon as the first coat has started curing and is no longer tacky to touch.
  6. The cured final coat is fine for foot traffic.

A typical system is 1 coat of the relevant primer and 2 coats of paint: apply the first coat no longer than 24 hours after the primer has cured or is dry to touch, and the second no longer than 24 hours after the first has cured. The pot life is 20 minutes – remove the paint from the tin within this window – and it stays workable on the floor for up to 40 minutes. 100% of the mixed material must be used in a single application. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply it before it becomes unworkable.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product is NOT UV stable and will discolour in prolonged or regular sunlight. For areas with plenty of sunlight, top coat with a coloured UVR coating such as our Chemical Resistant UVR Floor Paint.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • This product is NOT self levelling.
  • For a clear epoxy coating, see our Clear Epoxy Floor Paint.
Please Note
  • Do not apply on new or wet concrete (under 28 days old, or with a residual moisture content of 6% or higher); concrete must have a damp proof membrane beneath it for epoxy coatings.
  • Do not apply below 7°C or expose to freezing conditions. Temperatures below 20°C slow curing and drying.
  • Do not expose to chemicals, wash or allow water to rest on the surface until 7 days after application (full chemical cure).

Specifications

Size
2.5kg, 5kg, 10kg (Part A + Part B – weight is for the whole pack)
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Light Ivory, Leaf Green, Fern Green, Tomato Red, Golden Yellow, Vermillion, Jet Black, White, Sky Blue
Appearance
Professional, high gloss finish
Composition
Antimicrobial properties, 100% solids
Substrates
Bare concrete, wood, screeds, steel
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Floors where strict hygiene standards must be met
Solvent Content
Solvent free, low VOC
Thickness
250 microns/coat
Consumption Rate
0.25-0.30kg/m²
Coverage
Up to 4m²/kg
Recommended Coats
2
Pot Life
20 Minutes
Working Life
40 Minutes
Re-coat Time (at 20°C)
8-12 Hours
Re-coat Time (at 10°C)
16-24 Hours
Drying Time (at 20°C)
12-24 Hours
Car Traffic Time (at 20°C)
12-24 Hours
Car Traffic Time (at 10°C)
24-48 Hours
Industrial Traffic Time (at 20°C)
48 Hours
Industrial Traffic Time (at 10°C)
72 Hours
Full Chemical Cure Time (at 20°C)
7 Days
Minimum Temperature
7°C
Application Tools
Epoxy roller sleeve and frame, brushes
Usage Location
Interior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Antibacterial Epoxy Floor Paint 2.5kg to 10kg - MRSA EffectiveLight Grey / 2.5kg | Coverage 8-10m² per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy