Anti-slip step paint system – fine, medium or coarse grip

Anti-Slip Paint

Anti-Slip Step Paint 1kg or 2.5kg - Epoxy Stair Paint, Fine to Coarse Grip

High strength anti-slip epoxy step and stair paint in 1kg and 2.5kg packs, with fine, medium or coarse grip and 13 gloss colours.

SKU RCD887

£179.16 incl. VAT

Key features

  • Easy to mix and apply
  • Professional slip-resistant finish
  • Suitable for use indoors and outdoors
  • Available in fine, medium or coarse
  • Highly durable
  • Surface usable in 24 hours
  • Usable on metals, concrete, grano and more
  • Low VOC and solvent free
Colour: Light Grey
Size: 1kg | Coverage 3-4m² per coat
Anti-Slip Profile: Fine

Product details

Product description

This non-slip, heavy duty epoxy resin coating system gives long-lasting slip resistance to stairs and step treads. Made in the UK, the high strength formula withstands regular and high pedestrian traffic and heavy wheeled traffic, works well even on stair risers with limited dripping, and lasts for many years. Ideal for DIY and industrial users, it can rejuvenate a front door step while adding excellent grip, or give staff and the public a safe surface to walk on in workplaces in all conditions.

The anti-slip profiles improve grip underfoot to help reduce slips and trips, and each gives a highly durable, tough, decorative gloss finish that is easy to apply and withstands high traffic once cured. It is formulated to meet, and in many cases exceed, UK Health and Safety Executive slip resistance guidelines for floors in wet and dry conditions. Choose from three grades of silica sand blend:

  • Fine: a fine scatter of silica sand that adds non-slip properties while keeping as smooth and glossy a finish as possible.
  • Medium: more heavy duty than fine – a textured finish with enough grip to prevent most accidents, even in wet conditions.
  • Coarse: the highest grade, with exceptional protection in dry conditions and resistance to most slips in wet conditions; a more textured finish for areas where safety is key.
Coverage
  • 1kg: 3-4m² per coat
  • 2.5kg: 8-10m² per coat

In most cases 2 coats are advised.

Preparation

The concrete must be clean and free from dust, laitance, oil etc. Old paint finishes should be removed if they are flaking at all, and the surface sanded to create a texture (a mechanical key). Mechanical preparation (shot-blasting or grinding) is preferred and gives the best results; if that is not possible, sanding or our Concrete Etch and Clean is a good alternative (Etch and Clean is only suitable for bare concrete). Make good pinholes and defective concrete with a repair mortar, and shot or grit blast steel to a nominal Sa 2.5 Swedish standard. Once fully abraded, sweep and vacuum away all remaining dust and contaminants.

Priming

A relevant primer should be used, especially on new or oil-contaminated concrete:

Mixing & Application

The ambient temperature should be at least 7°C when applying.

  1. Stir Part A gently for 1-2 minutes with a mixing paddle on an electric drill to disperse the pigment and aggregate, then add ALL of Part B and mix for another 90 seconds until the colour and texture are uniform and the curing agent has fully dispersed. Keep the paddle in suspension to avoid mixing in air.
  2. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  3. Begin applying immediately with a roller and Epoxy Resin Roller Sleeve, cross rolling flat areas for an even, smooth finish and working down the floor; use several people on large areas.
  4. Cut in around the edges with a brush (a second pair of hands is useful).
  5. While the first coat is still tacky, scatter the aggregate by hand across it and back roll so the anti-slip properties take hold. Leave to cure, then brush off any aggregate that has not bonded into the paint.
  6. Re-coat as soon as the first coat has started curing and is no longer tacky to touch.
  7. Once fully cured the area is fine for foot traffic.

A typical system is 1 coat of the relevant primer and 2 coats of step paint: apply the first coat no longer than 24 hours after the primer has cured or is dry to touch, and the second no longer than 24 hours after the first has cured. The pot life is 20 minutes – remove the paint from the tin within this window – and it stays workable on the surface for up to 40 minutes. 100% of the mixed material must be used in a single application. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply it before it becomes unworkable.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Useful Information
  • If the paint is applied too thickly – particularly with fine and medium profiles – the anti-slip particles will not protrude through the surface and will not work effectively.
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product is NOT UV stable and will discolour in prolonged or regular sunlight. For areas with plenty of sunlight, top coat with a coloured UVR coating such as our Chemical Resistant UVR Floor Paint.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • This product is NOT self levelling.
  • For a clear epoxy coating, see our Clear Epoxy Floor Paint.
Please Note
  • Do not apply on new or wet concrete (under 28 days old, or with a residual moisture content of 6% or higher).
  • Concrete must have a damp proof membrane beneath it for epoxy coatings to be applied.
  • Do not apply below 7°C or expose to freezing conditions. Temperatures below 20°C will slow curing and drying.
  • Do not expose to chemicals, wash or allow water to rest on the surface until 7 days after application (full chemical cure).

Specifications

Size
1kg, 2.5kg (weight is for the whole unit)
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Light Ivory, Sky Blue, Leaf Green, Fern Green, Tomato Red, Golden Yellow, Vermillion, Jet Black, White
Anti-Slip Profiles
Fine, Medium, Coarse
Aggregate Sizes
Fine 0.4mm, Medium 0.8mm, Coarse 2mm
Anti-Slip Coating Thickness
Fine 0.25mm, Medium 0.45mm, Coarse 1mm
Appearance
High gloss, profiled paint finish
Composition
100% solids of medium viscosity combined with abrasion resistant fine filler and graded quartz
Substrates
Bare concrete, wood, screeds, steel, metals, grano and more
Product Components
3 part system – resin (Part A), activator (Part B), aggregate
Typical Installations
Non-slip stair painting in chemical plant storage areas, commercial and domestic stairs and steps, warehousing, toilets and food preparation areas
Solvent Content
Solvent free, low VOC
Thickness
250 microns/coat (without aggregate)
Consumption Rate
0.25-0.30kg/m²
Coverage
Up to 4m²/kg
Recommended Coats
2
Pot Life
20 Minutes
Working Life
40 Minutes
Re-coat Time (at 20°C)
8-12 Hours
Re-coat Time (at 10°C)
16-24 Hours
Drying Time (at 20°C)
12-24 Hours
Heavy Traffic Time (at 20°C)
12-24 Hours
Heavy Traffic Time (at 10°C)
24-48 Hours
Industrial Traffic Time (at 20°C)
48 Hours
Industrial Traffic Time (at 10°C)
72 Hours
Full Chemical Cure Time (at 20°C)
7 Days
Application Tools
Epoxy roller sleeve and frame, brushes
Usage Location
Indoors and outdoors
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Anti-Slip Step Paint 1kg or 2.5kg - Epoxy Stair Paint, Fine to Coarse GripLight Grey / 1kg | Coverage 3-4m² per coat / Fine

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy