20kg Renovation Plaster - Lightweight, Waterproofing Solution

Waterproofing & Tanking

Renovation Plaster 20kg Bags - Bulk Buy 10 to 40 Bags, Lightweight Perlite

Lightweight, fibre-reinforced cement-based renovation plaster with perlite in 20kg bags, sold in bulk packs of 10, 20, 30 or 40 bags – each bag covers up to 3m² at 10mm.

SKU RCD803

£511.60 incl. VAT

Key features

  • Fibre-reinforced to prevent cracking, perlite-enhanced for thermal insulation
  • Minimises the risk of condensation, preventing black mould
  • Blocks dampness and the transfer of ground salts
  • Lightweight and pre-mixed for consistent quality
  • Same benefits as the single unit, in bulk
Size: 10 x 20kg Bags | Coverage up to 3m² per bag at 10mm Thickness

Product details

Product description

This premium, lightweight, pre-mixed cement-based plaster is enhanced with perlite and designed to combat dampness in the walls of older buildings. It can be applied shortly after a new DPC is inserted, or used together with our Cement-Based Tanking Slurry. The bulk buy gives the same benefits as the single 20kg unit, more conveniently for larger renovation jobs, and it works with our High Impact Plaster Finish as a complete replastering system.

It replicates the properties of a traditional 1:1:6 cement:lime:sand mortar, with perlite as a lightweight aggregate substitute, so it is easy to apply while keeping structural integrity. Its breathable composition suits areas affected by damp or flooding, letting walls dry naturally. Waterproofing and salt-inhibiting additives reduce efflorescence and pattern staining, the lime raises alkalinity to inhibit mould and prevent rust on metal lathing and conduits, and man-made fibres reduce shrinkage and improve flexural strength – ideal for restoration and new construction. Its thermal insulation also reduces condensation on internal walls and in basements for a more stable, dry environment.

Coverage

A 20kg bag covers up to 3m² at a depth of 10mm.

Preparation

Make sure all surfaces are clean, stable and free from loose material, dust, laitance or old coatings, exposing the brickwork, masonry or concrete beneath. Remove all traces of old gypsum plaster and any organic matter, remove embedded objects such as nails or timber fixings, rake out loose joints to 20mm, clean out voids and prepare cutting points for fixtures. Smooth surfaces can be roughened to improve adhesion.

Priming: prime high-suction areas with our SBR Additive mixed 1:1 with clean water by volume, applied by roller, brush or spray, and wait about 30 minutes until tacky – or wet the surface thoroughly instead. Surfaces heavily contaminated with salts may need extra treatment with our Salt Inhibitor Primer.

Mixing & Application
  1. Put 9-11 litres of clean water into a mixing bucket.
  2. Using an Electric Mortar Drill & Paddle at low speed to reduce dust, gradually add the powder. When hand mixing, add half the bag to the water and mix well, then add the rest, adding more water if needed.
  3. Once all the powder is in, increase the speed and mix for about 1-3 minutes to a uniform, lump-free plaster. Machine mixing must not exceed 5 minutes, as this compromises the thermal properties.
  4. Let the mix stand for a few minutes before use – it makes application easier.
  5. Apply with a plastering trowel at 10-15mm per coat. For best results apply two coats at least 24 hours apart, keeping the total thickness to no more than 25mm.
  6. Between coats and before a finish coat, lightly comb or scratch the surface to create a mechanical key.

Wear appropriate PPE such as gloves and safety goggles. Causes skin irritation and serious eye damage, may cause an allergic skin reaction or respiratory irritation, and is harmful if swallowed – avoid breathing dust. If the product contacts skin, wash it off immediately with plenty of soap and water. If swallowed, immediately call a poison centre or doctor. If in eyes, rinse cautiously with water for several minutes, removing contact lenses if present and easy to do, and continue rinsing. Keep out of reach of children, and store tightly sealed in cool, dry conditions.

Please Note
  • Do not apply below 5°C or above 25°C, or on frozen or frost-filled surfaces.
  • This product is not waterproof; its alkalinity prevents soluble salt passage and mould growth. A damp proof course (DPC) is recommended to stop further water entry.
  • Not recommended on plasterboard, paper-faced boards, or surfaces with bituminous coatings or traces of gypsum.
  • Sweep up dry powder and dispose of it in accordance with the local authority.

Specifications

Size
20kg bags – 10 x 20kg, 20 x 20kg, 30 x 20kg or 40 x 20kg
Appearance
Loose, grey powder
Coverage
Up to 3m² per 20kg bag at 10mm depth
Water
9-11 litres per 20kg bag
Coat Thickness
10-15mm per coat; total no more than 25mm
Time Between Coats
At least 24 hours
Dry Powder Density
600 kg/m³
Density Air Dried
800 kg/m³
Density Oven Dried
725 kg/m³
Compressive Strength at 28 Days
3.0 N/mm²
Flexural Strength at 28 Days
1.4 N/mm²
Modulus of Elasticity
2,100 N/mm²
Thermal Conductivity (k) at 0% Moisture
0.13 W/m°C
Thermal Conductivity (k) at 3% Moisture
0.21 W/m°C
Thermal Resistance (R) at 13mm, 3% Moisture: 0.058 m²°C/W
Application Temperature
5°C to 25°C

Quote request

Get a quote for this product

Renovation Plaster 20kg Bags - Bulk Buy 10 to 40 Bags, Lightweight Perlite10 x 20kg Bags | Coverage up to 3m² per bag at 10mm Thickness

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy