SBR Additive for Enhanced Adhesion and Water Resistance

Waterproofing & Tanking

SBR Bonding Additive 5 or 25 Litre - Water Resistant Primer and Admixture

Water-resistant SBR bonding additive for primers, slurries, renders and repairs, in 5 Litre and 25 Litre containers.

SKU RCD809

£56.80 incl. VAT

Key features

  • Enhances adhesion – bonds superbly to brick, glass, asphalt, wood and many more surfaces
  • Performs reliably in damp conditions, excellent for waterproofing projects
  • Significantly boosts material strength
  • Increases workability, durability and resistance to abrasion
  • Minimises shrinkage and cracking, enhancing flexibility
Size: 5 Litre | Coverage approx. 2.5-3m² per litre (bonding coat)

Product details

Product description

This versatile, high-performance, water-resistant bonding agent can be used as an SBR primer or as an admixture to make durable, flexible SBR slurries, sand/cement renders, cementitious floor screeds and repair compounds, for internal and external cement-based mixes. It greatly improves the adhesion, water resistance, flexibility and durability of renders and slurries, and suits areas with intermittent or continuous water exposure. It works well on dry substrates to reduce suction, on non-porous and extremely smooth substrates, and is particularly effective for abrasion-resistant renders and floors and for patching and bonding to low-suction substrates.

What is SBR? SBR (Styrene Butadiene Rubber) is a water-resistant bonding and sealing agent with many similarities to PVA – but where PVA stays water-soluble after drying and can become porous, SBR dries water-insoluble and water-resistant, making it ideal for waterproofing projects. It can be added to cement, sand and water at varying ratios for cementitious renders, screeds or patching mixes, or simply used as a primer to improve the bond of tanking slurries or plaster.

Coverage

Coverage depends heavily on the use. As a bonding coat, 1 litre covers approximately 2.5-3m², varying with surface texture, porosity and thickness. Typically 10 litres per 50kg of Portland cement is enough for standard use; for extreme conditions or where extra adhesion, waterproofing or resistance is needed, increase to 15 litres per 50kg. Higher dosages may need less added water, and wet aggregates can make the mix overly workable.

Preparation

Make sure all surfaces are clean, stable and free from loose material, dust, laitance or old coatings, exposing the brickwork, masonry or concrete beneath. Rake out masonry joints, remove any old gypsum plaster and all organic materials and embedded objects such as nails or timber fixings. Depending on the application, the surface should be dry or slightly damp, with no standing water.

Mixing & Application

General mixing: mix by hand only up to a total mix weight of 25kg; use a forced action mixer for larger quantities. Blend the sand and cement for about one minute, add the SBR and mix briefly for 30 seconds to reduce air entrainment, then gradually add water to the right consistency, pausing to check. Total mixing time after adding the SBR must not exceed two minutes. Add water carefully – SBR's strong plasticising effect can thin the mix quickly.

SBR primer (water-resistant primer): cover non-target surfaces and wear PPE. Mix 1 part SBR to 3 parts clean water and apply by brush, roller or pressure sprayer. Leave about 30 minutes until tacky, then apply tanking slurry, screed, etc. If using a pressure sprayer, clean the nozzle thoroughly so the primer cannot dry inside it.

SBR bonding slurry: improves adhesion of cement-based mixes to low-suction surfaces and is ideal before SBR-modified mixes. Grit-blast the surface for a mechanical key. Moisten absorbent surfaces until matt damp (no standing water) or prime high-suction surfaces with SBR primer. Mix 1-2 parts OPC to 1 part SBR by volume and brush on vigorously with a stiff brush for full coverage, at 0.3-0.5mm thick – avoid thicker layers. Apply the render or top coat while the slurry is still wet; if it dries, apply another coat at right angles to the first. Only prepare areas that can be screeded or rendered within 15 minutes. Hand mixing is recommended to avoid trapping air.

Standard render over a dense background: 1 part OPC, 4.5 parts soft washed sand and 0.2 parts SBR, with water as required (e.g. 5 litres SBR per 25kg cement).

Waterproof render above ground over a dense background: 1 part OPC, 3 parts soft washed sand and 0.28 parts SBR, with water as required (about 14 litres SBR per 50kg cement).

For both renders: apply onto tacky primer with the first coat no more than 7mm thick, scratch it and let it set. For extra protection let the first coat set overnight and apply another bonding coat. Apply the second coat at a similar thickness, then trowel or float to a smooth finish. In severe drying conditions keep the render damp for up to two days so the cement cures properly.

Concrete repair: apply a bonding coat as above, then use 1 part OPC, 2.5 parts soft washed sand and 0.3 parts SBR, with water as needed (about 15 litres SBR per 50kg cement).

Flexible additive for cement-based tile adhesive: dilute SBR 1:1 with fresh, clean water and combine with the powder; this may slightly delay setting.

Other uses: bedding mixes for tiles, kerb stones, coping stones, mosaics and brick slips; patching renders or concrete; and as a damp-proofing slurry in basements to combat damp coming through from behind plaster.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water. If swallowed, immediately call a poison centre or doctor. If in eyes, rinse cautiously with water for several minutes, removing contact lenses if present and easy to do, and continue rinsing. Seek medical advice if discomfort occurs.

Please Note
  • Do not apply on frost-filled surfaces, or when temperatures are below 5°C and falling or above 25°C and rising.
  • Unsuitable for coloured renders – limited UV resistance can cause discolouration.
  • Do not overmix, and do not combine with other additives in the same gauging water.
  • Mixes given are guidelines only, not a specification, as materials and site conditions vary.

Specifications

Size
5 Litre, 25 Litre plastic containers
Appearance
Milky, white liquid
Type
Styrene Butadiene Rubber (SBR) bonding additive
Coverage (as bonding coat)
Approx. 2.5-3m² per litre, depending on texture, porosity and thickness
Typical Dosage
10 litres per 50kg of Portland cement (up to 15 litres per 50kg for extreme conditions)
Usage Location
Internal and external
Application Temperature
Not below 5°C and falling, or above 25°C and rising

Quote request

Get a quote for this product

SBR Bonding Additive 5 or 25 Litre - Water Resistant Primer and Admixture5 Litre | Coverage approx. 2.5-3m² per litre (bonding coat)

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy