Liquid Rubber Waterproof Roof Coating 5L

Roof Coatings

Liquid Rubber Roof Coating 5 Litre - One Coat Waterproof Roof Repair

5 Litre ready-to-use liquid rubber roof coating that forms a flexible, seamless waterproof membrane in one coat, covering about 1m² per litre.

SKU RCD866

£180.50 incl. VAT

Key features

  • Flexible, seamless rubber waterproofing
  • Ready to use – no mixing required
  • One-coat system for straightforward repairs
  • Approx. 1m² coverage per litre
  • Fantastic adhesion, quick and easy application
  • Resistant to frost and water damage
  • Available in Black or Grey
Colour: Black
Size: 5 Litre | Coverage up to 5m² per coat

Product details

Product description

Stop leaks and protect your roof without replacing a sound roof covering. This high quality, cold-applied, one-pack coating protects against leaks and corrosion, forming a seamless waterproof membrane with a flexible, elastomeric rubberised finish that accommodates normal expansion and contraction and will not crack or melt. Ideal for repairing flat roofs and suitable pitched roofs, it is easy for DIY users to apply without specialist equipment – there is no hardener or mixing ratio, just stir and apply. It has excellent adhesion to many substrates, resists frost and water damage, and comes in Black or Grey with the same performance in either colour.

Use it on garages, extensions, sheds and garden buildings, as well as skylights, chimneys and anywhere needing weather or waterproofing. Suitable surfaces include weathered roofing felt, weathered asphalt and bituminous roofing, concrete, brickwork and masonry, wood, GRP and fibreglass, and suitable metal roofing.

Coverage

Allow at least 1 litre per m² for one generous coat.

Roof area Minimum coating required
5 m² 5 litres
10 m² 10 litres
20 m² 20 litres

Measure the complete area being coated. Rough, uneven or porous surfaces may need more product to achieve a continuous waterproof membrane.

Preparation

The surface must be sound, clean and dry. Clean it thoroughly, removing moss, lichen, dust, laitance, dirt, debris, loose material, rust, oil, grease, salts, previous loose coatings, varnishes and any other contamination, and let the roof dry completely after washing. Make good any damage, and repair holes, open cracks and defective joints.

Reinforcing cracks, joints and details: bridge all joints, seams, cracks and vents with a geotextile reinforcing tape such as our Roof Scrim Tape, reinforcing joints at a width of 10-15cm, along with splits, previous repairs and vulnerable details such as upstands, corners, skylight bases, pipe penetrations and rainwater outlets. Cracks under 4mm can be filled with uncured liquid rubber; larger cracks need tape and coating together. Embed the tape into wet liquid rubber, press it flat without wrinkles or trapped air, and coat over it until fully covered – these details are coated beneath and over the tape, while the wider roof stays a one-coat application.

Application
  1. Stir thoroughly until uniform. Do not thin.
  2. Apply by brush or solvent-resistant roller like a coat of paint, cross rolling for an even coating, at a minimum of 1 litre per m².
  3. Create a continuous coating with no missed areas or pinholes, paying attention to edges and reinforced details. Apply a single layer to avoid extra thickness and extended cure times.
  4. Clean tools with white spirit before the coating cures.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Please Note
  • The roof must be dry during application. Do not apply to damp, frozen or waterlogged surfaces, on freshly laid bitumen, or on new or wet concrete (under 21 days old, or with a residual moisture content of 6% or higher).
  • Do not apply below 2°C or expose to freezing conditions; temperatures below 20°C slow curing and drying.
  • Do not expose to chemicals, wash or allow water to rest on the surface until at least 48 hours after application.
  • Do not let excess coating enter drains or sanitation systems.
FAQs

Can I apply it over an existing roof coating?
Possibly, if the existing coating is sound and securely bonded. Where it is unidentified, carry out a small adhesion test before coating the whole roof.

Will it fix standing water on my roof?
No. The roof still needs adequate falls and drainage – give areas where water collects extra attention during preparation and reinforce vulnerable details, but the coating cannot correct drainage problems.

Can I walk on a coated roof?
It is a waterproof roofing membrane, not a floor coating, and is not intended for balconies, walkways or regular foot traffic.

Can I keep unused coating?
Yes – reseal the container and store it correctly for future use.

Specifications

Size
5 Litre single part unit
Colours
Black, Grey
Appearance
Smooth, rubberised finish
Composition
Solvent based polymer modified rubber
Product Components
One-pack system
Consumption Rate
1L/m² (minimum)
Coverage
Up to 1m² per litre
Recommended Coats
1
Touch Dry Time (at 20°C)
1 hour
Hard Dry Time (at 20°C)
8-12 hours
Waterproof Time (at 20°C)
48 hours
Full Cure
Approximately 6-7 days
Life Expectancy
10 years once applied
Fire Performance
Roofing system tested to BS 476 Part 3:2004 EXT.F.AC
Application Temperature
Best at 5-30°C air and surface; never below 2°C
Application Tools
Brush or solvent-resistant roller
Usage Location
Exterior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Liquid Rubber Roof Coating 5 Litre - One Coat Waterproof Roof RepairBlack / 5 Litre | Coverage up to 5m² per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy