20m² Liquid Rubber Roofing Waterproof Coating Bundle

Roof Coatings

Liquid Rubber Roof Repair Kit 20m² - 20L Coating, Tape & Tools

Complete 20m² liquid rubber roof repair kit with 20 litres (4 x 5L) of waterproof coating, 50m of geotextile reinforcing tape and application tools.

SKU RCD1266

£669.98 incl. VAT

Key features

  • Immediate waterproofing for roofs up to 20m²
  • Complete DIY kit
  • Single coat solution on suitable prepared surfaces
  • Unmatched durability
  • Highly cost effective
  • Tackles the toughest of leaks
  • Flexible elastomeric, rubberised finish that accommodates normal roof movement
  • Fantastic adhesion
  • Resistant to frost and water damage
Colour: Black
Size: 20 Litre (4 x 5L) | Coverage up to 20m² (1 coat)

Product details

Product description

This DIY friendly kit gives you everything you need to repair leaks and protect, seal and waterproof up to 20m² of felt, sheet metal or wood roofing in one bundle – ideal for a single garage roof repair. The liquid rubber waterproof coating forms a seamless, flexible waterproof membrane over the existing roof surface, avoiding the cost and disruption of replacing a sound roof covering. Highly cost effective compared with alternative repairs and incredibly durable, it cures to a highly durable rubber that will not crack or melt, with a 10 year life expectancy once applied.

Suitable for garages, extensions, sheds, garden buildings and other suitable flat or pitched roofs where the existing covering is still sound but suffering from leaks, cracks or general deterioration. It is ready to use, with no separate hardener or complicated mixing ratio, and is available in Black or Grey.

What's Included
  • 4 x 5L liquid rubber waterproof coating
  • 1 x 50m geotextile reinforcing tape
  • 1 x roller frame
  • 1 x paint scuttle
  • 1 x mixing paddle
  • 1 x roller sleeve
  • 2 x paint brushes
  • 1 x pair of disposable gloves
Coverage

The kit contains 20 litres of liquid rubber and is designed to cover up to approximately 20m² at the recommended rate of 1 litre per m². Coverage can reduce on rough, porous or uneven surfaces, so allow additional material where necessary to achieve a continuous, generous waterproof membrane.

Suitable Roofs
  • Flat roofs
  • Pitched roofs
  • Weathered roofing felt
  • Weathered asphalt and bituminous roofing
  • Concrete and masonry
  • GRP and fibreglass
  • Suitable metal roofing
  • Garage and extension roofs
  • Shed and garden building roofs

The existing roof must be sound, clean and completely dry before application. If you're unsure whether an existing coating is compatible, carry out a small adhesion test before coating the whole roof.

Preparation

Remove moss, lichen, dirt, dust, laitance, loose material, oil, grease, previous coatings, varnishes, salts and any other contamination. Repair any damaged or loose areas before coating. If the roof is washed or pressure cleaned, allow it to dry completely before applying.

Reinforcing Cracks, Joints & Vulnerable Areas

Use the supplied geotextile reinforcing tape wherever movement or water ingress is most likely:

  • Cracks and splits
  • Roof joints and seams
  • Previously repaired areas
  • Upstands
  • Corners and changes in direction
  • Skylight bases
  • Pipe penetrations and vents
  • Rainwater outlets

All joints, seams, cracks and vents must be bridged with the tape, and joints additionally reinforced with geotextile at a 10-15cm width. Smaller cracks under 4mm can be filled with uncured liquid rubber; larger cracks should be reinforced using the tape and coating in combination. Apply liquid rubber to the prepared area, embed the tape into the wet coating and smooth it into position without wrinkles or trapped air, then apply more liquid rubber over the tape until fully covered.

Application
  1. Prepare the roof as described above.
  2. Reinforce vulnerable areas with the geotextile tape.
  3. Stir each container until the coating is completely uniform. Do not thin.
  4. Apply one generous coat with the supplied brush or roller, as though applying paint, at a minimum rate of 1 litre per m². Cross roll for an even coating and work methodically across the roof to create a continuous membrane without missed areas or pinholes. Apply a single layer to avoid extra thickness and extended cure times.
  5. Allow up to 8 hours or overnight for drying, depending on temperature and conditions. Full cure can take approximately 6-7 days.

Clean all tools with white spirit before the coating cures. Wear appropriate PPE such as gloves and protective safety goggles; if the product contacts skin, wash off immediately with plenty of soap and water and seek medical advice if discomfort occurs.

Please Note
  • The roof must be dry during application. Do not apply to frozen, damp or waterlogged surfaces, or to new or wet concrete (under 21 days old or with a residual moisture content of 6% or higher).
  • Do not apply below 2°C or expose to freezing conditions; temperatures below 20°C will slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until at least 48 hours after application.
  • Do not allow excess product to enter any drains or sanitation systems.
  • Liquid rubber is a waterproof roofing membrane, not a trafficable floor coating – it is not designed for balconies, walkways or areas subject to regular foot traffic.
FAQs

Is 20 litres enough for a 20m² roof?
Yes. Applied at a minimum of 1 litre per m², 20 litres covers up to approximately 20m² on a suitable prepared surface. Rough or porous roofs may need more material.

Does the kit contain everything I need?
It includes the coating, 50 metres of reinforcing tape and key application tools. Additional cleaning or repair materials may be needed depending on the condition of your roof.

Does it really only need one coat?
Yes. On a suitable, correctly prepared roof it is designed to give waterproof protection from one generous continuous coat at the recommended coverage rate.

Can I use this kit to repair a leaking garage roof?
Yes, on garage roofs where the existing covering is sound but needs waterproofing or local repairs. Reinforce cracks, joints and vulnerable details with the supplied tape.

Can I use it on roofing felt or an existing flat roof?
Yes, on suitably weathered felt and on existing flat and pitched roofs that are structurally sound. The surface must be sound, clean and completely dry.

Specifications

Size
20 litres of coating (4 x 5L) – covers up to approx. 20m²
Colour
Black or Grey
Appearance
Smooth, rubberised finish
Composition
Solvent based polymer modified rubber
Substrates
Flat roofs, weathered asphalt, concrete, brickwork, wood
Product Components
One-pack system
Typical Installations
Roofing, skylights, chimneys, anywhere that requires weather/waterproofing
Touch Dry / Re-coat Time (at 20°C)
1 hour
Drying Time (at 20°C)
8-12 hours
Waterproof Time (at 20°C)
48 hours
Full Cure
Approximately 6-7 days
Consumption Rate
1 litre per m² (minimum)
Coverage
Up to 1m² per litre
Recommended Coats
1
Application Tools
Roller, brush
Usage Location
Exterior
Application Temperature
Approximately 5-30°C for best results (roof surface and surroundings)
Shelf Life
12 months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Liquid Rubber Roof Repair Kit 20m² - 20L Coating, Tape & ToolsBlack / 20 Litre (4 x 5L) | Coverage up to 20m² (1 coat)

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy