Cold Storage Polyurethane Joint Sealant - Fast Curing

Joint Sealants

Cold Storage Polyurethane Joint Sealant 1kg or 2.5kg - Cures to -2°C

Two-part, fast-curing polyurethane joint sealant for freezers and cold stores, curing down to -2°C – 1kg fills 6.6m of 10mm x 10mm joint.

SKU RCD358

£97.98 incl. VAT

Key features

  • Cures at temperatures down to -2°C
  • Fast curing for quick-turnaround cold storage projects
  • Non food tainting – safe to use
  • Low odour
  • Flexible formula allowing for movement
  • Extremely durable with excellent adhesion
Colour: Light Grey
Size: 1kg | Coverage 6.6m at 10mm x 10mm joint

Product details

Product description

A two-part catalysed, flexible polyurethane sealant ideal for freezers and refrigerators down to -2°C. Its rapid cure suits quick-turnaround repairs, and once mixed it pours easily into exposed joints to give a perfect expansion joint sealant in cold conditions.

The sealant performs well under expansion and contraction, making it ideal for freezers and any cold storage area with temperatures as low as -2°C, and gives high-strength, long-lasting repairs. The fast-cure formula lets you finish time-critical jobs and reopen the site to traffic a few hours after curing – a maximum of 12 hours at -2°C. It is smooth and easy to pour for a professional finish that lasts for years, and stays highly flexible, retaining its full properties and memory while allowing normal joint movement. With high mechanical resistance, it is also well suited to connection joints in concrete floors and floor joints between pre-cast concrete elements, indoors or out. Made in the UK, the high-strength formula is non food tainting and low odour, so it is safe to use in food storage areas.

Coverage
  • 1kg: 6.6 metres at a joint depth and width of 10mm
  • 2.5kg: 16.5 metres at a joint depth and width of 10mm
Preparation

The concrete should be at least 28 days old, free of laitance, dust, grease, oil and existing coatings, with a base relative humidity of 75% or lower, a minimum strength of 25N/mm² and residual moisture below 6%. Vacuum the joint to remove any loose material or debris that could make the sealant set unevenly; if the crack is wide enough, clean it out with a wire brush.

Mixing & Application
  1. Pour 100% of Part B into the Part A tin and mix thoroughly with a drill and paddle for at least 90 seconds, until the colour and texture are uniform and the curing agent is fully dispersed. All mixed material must be used in a single application.
  2. Pour slowly and evenly into the joint straight from the mixed unit, slightly overfilling, then immediately level off with a scraper.
  3. Once levelled, remove any duct tape from the edges of the joint and leave to cure – allow 12-24 hours for a full cure.

Pot life is 20 minutes – once mixed, the material starts to cure chemically after this time, so remove it from the tin within this window. It stays workable for up to 30 minutes.

Useful Information
  • Do not split the product. Taking smaller quantities from each tin, even if measured correctly, can cause activation problems.
Please Note
  • Do not apply on new or wet concrete (residual moisture content of 6% or higher).
  • Temperatures below 20°C slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until 7 days after application.
  • Not UV stable – do not expose to prolonged sunlight, as it will discolour.
  • Use only in a well-ventilated area and wear suitable PPE such as gloves and safety goggles. If the product gets on skin, wash off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Specifications

Size
1kg, 2.5kg (whole pack weight, Part A + Part B)
Appearance
Smooth, self-levelling sealant
Composition
Catalysed polyurethane cold storage sealant
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Freezers, refrigerators and any cold storage area down to -2°C
Tack-free Time @-2°C
12 hours
Hard-cure Time @-2°C
12-24 hours
Pot Life @-2°C
20 minutes
Working Life @-2°C
30 minutes
Adhesive Strength
3.9 N/mm²
Coverage
6.6m per kg at 10mm x 10mm
Shelf Life
12 months
Application Method
Pour, or pressure injection
Usage Location
Interior/exterior
Storage Temperature
-2 to 25°C
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Light Ivory, Sky Blue, Leaf Green, Fern Green, Tomato Red, Golden Yellow, Vermillion, Jet Black, White

Quote request

Get a quote for this product

Cold Storage Polyurethane Joint Sealant 1kg or 2.5kg - Cures to -2°CLight Grey / 1kg | Coverage 6.6m at 10mm x 10mm joint

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy