Clear epoxy floor paint – durable concrete sealer

Floor Paint

Clear Epoxy Floor Paint 1kg to 10kg - High Gloss Concrete Sealer

Clear, high-gloss, 100% solids epoxy floor paint that seals concrete and reduces dusting, in 1kg, 2.5kg, 5kg and 10kg packs.

SKU RCD989

£83.98 incl. VAT

Key features

  • Clear, high-gloss professional finish
  • Seals concrete and reduces dusting
  • Resists oil, grease and everyday wear; easy to clean
  • Protective clear coat for coloured epoxy
  • 100% solids, solvent-free epoxy resin, low VOC
  • DIY-friendly roller application
  • Surface usable in 24 hours
  • Superb coverage
Colour: Clear
Size: 1kg | Coverage up to 5m² per coat

Product details

Product description

This clear, colourless high build epoxy coating combines the character of exposed concrete with the strength of a resin floor. Its clear, high-gloss finish seals the surface, reduces concrete dusting and resists oil, grease and foot traffic, leaving a smooth floor that is easy to clean and maintain. With great abrasion resistance, it suits homes, galleries, studios and commercial interiors where the floor is part of the design, as well as garages, factories, breweries, workshops, storage areas and busy working environments where colour is not a priority.

It can also be applied as a protective clear topcoat over our coloured high build epoxy paints, adding another wearing layer that takes the day-to-day wear while keeping the colour visible beneath a glossy surface. Apply it over a sound, correctly prepared high build epoxy coating, following that basecoat's preparation and re-coating instructions. For a full colour change instead, see our Epoxy Garage Floor Paint, Showroom Epoxy Floor Paint, Factory Floor Paint, Warehouse Floor Paint or Anti-Slip Epoxy Floor Paint.

Coverage
Pack size Coverage per coat
1kg Up to 5m²
2.5kg Up to 12.5m²
5kg Up to 25m²
10kg Up to 50m²

Two coats are normally recommended, so allow enough to cover the floor twice – for example, a 20m² floor needs two 5kg packs, one per coat. Mix each pack only when ready rather than splitting a larger pack between coats. Actual coverage depends on texture, porosity and thickness; allow extra for rough or absorbent surfaces.

Preparation

The concrete must be clean and free from dust, laitance, oil, loose or flaking coatings and other contamination. Mechanical preparation such as grinding or shot blasting is preferred to create a key, and sound existing coatings should be abraded. For suitable bare concrete, our Concrete Etch and Clean is an alternative (bare concrete only, not painted surfaces). Make good blow holes and defective concrete with a repair mortar and address uneven areas – this is a roller-applied coating, not a self-levelling system. Shot or grit blast steel to a nominal Sa 2.5 Swedish standard, then vacuum thoroughly.

Priming

Prime bare concrete to seal it and create a base for the epoxy. Use a clear primer, otherwise the pigment will show through the clear coating:

Damp concrete needs a suitable moisture-control system; our Damp Tolerant Epoxy Primer gives a grey base, so suits projects where the concrete does not need to stay visible. Over an existing high build epoxy coating, follow that coating's preparation and re-coating guidance instead.

Mixing & Application

Each pack includes the resin and hardener; primer, preparation products and tools are sold separately. You will need an electric drill with a Mixing Paddle, an Epoxy Resin Roller Sleeve and Roller Frame, a plastic paint scuttle or tray, a brush for the edges, and suitable protective equipment.

  1. Apply when the ambient temperature is at least 7°C. Mix Part A on its own with a drill-mounted paddle for about 1 minute, then add all of Part B and mix for another 90 seconds until the curing agent has fully dispersed, keeping the paddle submerged to minimise air. Always mix complete packs.
  2. Transfer the mix straight into a plastic paint scuttle or tray and apply evenly with an epoxy roller, cross rolling flat areas and cutting in at the edges with a brush. Use several people on large areas.
  3. Pot life is about 20 minutes, so start applying immediately; working time on the floor is up to 40 minutes. Temperature affects these times.
  4. Once the first coat is tack-free, apply the next coat within the re-coat window, using a fresh roller sleeve for each coat.

A typical system is 1 coat of a clear primer and 2 coats of clear epoxy: apply the first coat no longer than 24 hours after the primer has cured or is dry to touch, and the second no longer than 24 hours after the first has cured. 100% of the mixed material must be used in a single application. Wear appropriate PPE such as gloves and safety goggles; if the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Please Note
  • Do not apply on new or wet concrete (under 28 days old, or with a residual moisture content of 6% or higher); concrete must have a damp proof membrane beneath it for epoxy coatings.
  • Do not apply below 7°C or expose to freezing conditions. Temperatures below 20°C slow curing and drying.
  • Do not expose to chemicals, wash or allow water to rest on the surface until 7 days after the final coat.
  • Not UV stable – best for interior areas away from repeated direct sunlight, as it can discolour. For a UV-resistant clear topcoat over compatible coatings, use a clear polyurethane UVR coating.
FAQs

Will it hide marks or repairs in my concrete?
No. The clear finish keeps the surface visible, including natural variations and existing repairs. For an even, solid colour choose a coloured epoxy floor paint, and test the full primer and coating system on a small area to judge the finished look.

Can I use it on worktops and display surfaces?
Yes, it is also used as a protective clear coating on suitably prepared worktops and display surfaces – follow the preparation guidance for the material being coated.

Specifications

Size
1kg, 2.5kg, 5kg, 10kg (Part A + Part B – weight is for the whole pack)
Colour
Clear
Appearance
Translucent, high gloss finish
Composition
100% solids epoxy
Substrates
Bare concrete, wood, screeds, steel
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Garages, factories, breweries, storage areas and anywhere colouration is not a priority
Solvent Content
100% solvent free, low VOC
Thickness
250 microns/coat
Consumption Rate
0.3-0.40kg/m²
Coverage
Up to 5m²/kg per coat
Recommended Coats
2
Pot Life
20 Minutes
Working Life
40 Minutes
Re-coat Time (at 20°C)
8-12 Hours
Re-coat Time (at 10°C)
16-24 Hours
Drying Time (at 20°C)
12-24 Hours
Car Traffic Time (at 20°C)
12-24 Hours
Car Traffic Time (at 10°C)
24-48 Hours
Industrial Traffic Time (at 20°C)
48 Hours
Industrial Traffic Time (at 10°C)
72 Hours
Full Chemical Cure Time (at 20°C)
7 Days
Minimum Temperature
7°C
Application Tools
Epoxy roller sleeve and frame, brushes
Usage Location
Interior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Clear Epoxy Floor Paint 1kg to 10kg - High Gloss Concrete SealerClear / 1kg | Coverage up to 5m² per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy