Self Levelling Compound 3-50mm for Smooth Floor Base

Screeds & Levelling

Fibre Reinforced Self Levelling Compound 20kg - 3-50mm Floor Leveller

20kg fibre-reinforced self levelling compound that levels uneven internal floors from 3mm to 50mm in a single application.

SKU RCD724

£78.18 incl. VAT

Key features

  • Levels from 3-50mm in a single application
  • Mix with water, pour and spread
  • Walkable in approximately 4 hours at 20°C
  • 20kg bag covers approximately 2.35m² at 5mm
  • Compatible with underfloor heating
  • Compatible with high build epoxy resins
  • Heavy duty, industrial strength with exceptional compressive and flexural strength
Size: 20kg | Coverage approx. 2.35m² at 5mm Thickness

Product details

Product description

Create a smooth, even base for your next flooring project. This single-part, fibre-reinforced screed levels and smooths damaged or uneven internal floors before floor coverings are laid or high-build epoxy resin coatings are applied. It has exceptional compressive and flexural strength and heavy duty, industrial strength, and its early strength development makes it ready for over-coating with epoxy resin.

Its 3-50mm range lets you tackle shallow levelling and deeper uneven areas with one product: simply mix with water, then pour and spread over the prepared floor in one application. Suitable for domestic and commercial projects, it levels concrete, screed and prepared timber floors, whether you are renovating a room or preparing a surface for a resin finish.

Coverage
Application Depth Approximate Coverage per 20kg Bag
3mm 3.92m²
5mm 2.35m²
10mm 1.18m²
20mm 0.59m²
50mm 0.24m²

Use your floor area and average depth to estimate the bags needed. For example, a 20m² floor at an average depth of 5mm needs 170kg of powder – 9 x 20kg bags – before any allowance for wastage or deeper areas. Round up to whole bags and keep a minimum thickness of 3mm across the floor.

Mixing Ratios
Quantity Water
20kg (Full bag) 4.0 – 4.4 Litres
10kg 2.0 – 2.2 Litres
5kg 1.0 – 1.1 Litres
Preparation

All installations should be carried out in accordance with BS 5385. Start with a clean, firm, fully cured floor, free from dust, dirt, loose material, oil, grease, laitance and anything else that may affect adhesion. The base must be rigid, secure and dry, without deflection and able to support the intended weight, with a subfloor relative humidity no higher than 75%.

Prime with a suitable Epoxy Floor Primer and sprinkle medium-profile Anti-Slip Paint Additive over the wet primer to create a sandpaper-like texture that gives the compound its bonding surface. Use one coat of a suitable epoxy primer, or two coats when using an oil-tolerant or damp-tolerant primer – let the first coat cure before applying the second, then add the aggregate to the final wet coat. Allow the primed surface to fully cure and brush away loose aggregate before pouring. Primer and aggregate are sold separately.

Timber floors: floorboards, tongue-and-groove boards and chipboard (internal use only) must first be over-boarded with suitable 15mm tile backer board or plywood, then primed. The timber construction must stay adequately ventilated underneath to prevent moisture distortion and warping.

Mixing & Application
  1. Mix each 20kg bag with 4.0-4.4 litres of clean, cold tap water in a clean vessel, using a suitable drill and whisk at slow speed for at least 3 minutes, until smooth, lump-free and fully dispersed.
  2. The mix is ready to use immediately and has a working time of approximately 15-20 minutes. Prepare your tools and floor before mixing, and discard any material that stiffens before pouring – do not add extra water.
  3. Pour onto the prepared floor and spread with a smooth-edge trowel to the required depth (3-50mm) in one operation. A Spiked Roller can also be used for a smooth, even finish that needs no further attention before floor coverings go down.
  4. Lay between 5°C and 25°C, and keep air and subfloor temperatures above 5°C for one week afterwards. Setting and hardening is faster at high temperatures and slower at low ones. Ventilate during drying, but eliminate draughts to avoid uneven drying.
Cure Times

Light foot traffic is possible after approximately 4 hours at 20°C. Before coating, allow approximately one day of drying for every 1mm of depth – a 5mm layer needs about five days. Temperature and ventilation affect drying, so treat this as a planning guide rather than a guaranteed coating date. The floor must reach a relative humidity of no more than 75% before resin coatings are applied. The 28-day hard-dry time is a separate milestone from walking on or over-coating the surface.

Useful Information

Underfloor heating: switch existing underfloor heating off at least 3 days before application so the floor can cool, keep it off during application and for 2 weeks afterwards, then restart at a low temperature and increase by 5°C per day. When covering new electric underfloor heating, keep the system off during application and for 2 weeks afterwards, then start low and increase by 5°C per day.

Storage: store unopened clear of the ground in a cool, dry, frost-free place, under cover and protected from the weather so the packaging is not exposed to moisture.

Please Note
  • Causes skin irritation and serious eye damage; harmful if swallowed; may cause respiratory irritation. Contains chromium (VI), which may produce an allergic reaction. Repeated exposure may cause skin dryness and cracking.
  • Wear protective gloves and eye protection, avoid breathing dust, and wash hands thoroughly after handling. Keep out of reach of children.
  • If skin irritation occurs, get medical advice. If swallowed, call a poison centre or doctor if you feel unwell. If in eyes, rinse cautiously with water for several minutes, remove contact lenses if easy to do, continue rinsing and call a poison centre or doctor immediately.
  • Dispose of contents and container in accordance with local regulations.

Specifications

Size
20kg bag
Appearance
Smooth, natural sand coloured appearance
Composition
Fibre-reinforced screed
Substrates
Existing concrete, screed and timber floors
Product Components
20kg bag to be mixed with cold, clean water
Typical Installations
Anywhere that needs levelling before applying paint
Bed Thickness
3 - 50mm
Consumption
1.7kg of dry powder per m² per 1mm thickness (e.g. 8.5kg per m² at 5mm)
Water
4.0 - 4.4 litres per 20kg bag
Pot Life
20 minutes at 20°C
Working Time
Approximately 15-20 minutes
Application Temperature
5°C to 25°C
Walk On Time (at 20°C)
4 hours
Drying Before Coating
Approximately 1 day per mm of depth
Hard Dry Time (at 20°C)
28 days – the point at which it reaches its maximum quoted strength
Conformity
BS EN 13813, CT C35 F9
Pump Application
Suitable
Application Tools
Smooth-edge trowel, Spiked Roller
Usage Location
Interior
Shelf Life
12 Months

Quote request

Get a quote for this product

Fibre Reinforced Self Levelling Compound 20kg - 3-50mm Floor Leveller

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy