5kg cement-based waterstop quick-set plug

Waterproofing & Tanking

Waterstop Rapid Set Water Plug 5kg - Stops Active Leaks in Minutes

5kg rapid-setting cementitious water plug that stops active water leaks in concrete and masonry within minutes.

SKU RCD815

£61.92 incl. VAT

Key features

  • Durable, waterproof seal when a fast solution is needed
  • Withstands both negative and positive water pressure
  • Excellent adhesion to concrete and masonry
  • Suitable for interior and exterior use
Size: 5kg (2 x 2.5kg) | Yields approx. 3 Litres mixed

Product details

Product description

This easy-to-use, cement-based water plug stops water at the point of ingress fast. Blended with chemical modifiers and specially selected aggregates, it hardens rapidly once mixed with water, forming a durable, non-shrinking mortar plug in 1-3 minutes that seals against water. Once fully cured it is impermeable to water and frost-resistant, withstands both positive and negative water pressure, and adheres excellently to concrete and masonry, inside and out.

It is used to stop active leaks or seepage under pressure through holes, joints and cracks in concrete or masonry walls, swimming pools, tunnels, fountains, cisterns, water channels, ponds, pipes, basements, foundations and retaining walls. It is a provisional repair and should be followed by a permanent tanking treatment such as our Cement-Based Tanking Slurry.

Coverage

5kg produces roughly 3 litres of mixed material; actual coverage depends on the situation.

Preparation

All contact surfaces must be sound, clean and abraded to give a mechanical key. Remove loose debris, plaster, paint and oily residues by wire brushing, chiselling or scraping until a clean, sound substrate remains. Cut cracks, horizontal and construction joints to at least 20mm deep and wide, with an undercut if possible – do not feather edge. Priming is not needed in wet conditions, but moisten dry concrete or masonry with clean water before applying.

Mixing & Application
  1. Mix the powder with clean water at 4:1 by volume in a clean vessel – we recommend 250-270ml of water per 1kg of powder. Use a semi-wet mix for damp cracks and fillets, and a stiffer mix for active water.
  2. Wearing chemical resistant (nitrile) gloves, mix by hand. Only mix as much as you can place within 1-2 minutes.
  3. Press the mix firmly into the crack or fillet with a fillet trowel or gloved hand, working from the lower pressure area towards the point of highest water pressure.
  4. Press and hold the material against the pressure until it sets.
  5. Trim any excess from the surface within three minutes, and moisten the fillet afterwards.

Once mixed with water the product becomes alkaline – avoid contact with skin and eyes, and wear eye protection, a dust mask and gloves. If the product contacts skin, wash it off immediately with plenty of soap and water. If swallowed, immediately call a poison centre or doctor. If in eyes, rinse cautiously with water for several minutes, removing contact lenses if present and easy to do, and continue rinsing. Seek medical advice if discomfort occurs.

Please Note
  • Mix only enough for immediate use – it cannot be reworked once set. Do not re-temper stiffened material.
  • Do not apply on frozen or frost-filled surfaces, or below 5°C or above 25°C.
  • Lower temperatures can extend working and setting times; higher temperatures shorten them.

Specifications

Size
5kg bucket (2 x 2.5kg bags)
Appearance
Loose powder, mixes to a cementitious water plug
Yield
Approx. 3 litres of mixed material per 5kg
Mixing Ratio
4:1 powder to water by volume (250-270ml water per 1kg powder)
Set Time
1-3 minutes
Application Temperature
5°C to 25°C
Usage Location
Interior and exterior
Shelf Life
6 months – unopened, undamaged and stored correctly

Quote request

Get a quote for this product

Waterstop Rapid Set Water Plug 5kg - Stops Active Leaks in Minutes

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy