3mm Waterproof Floor Membrane 40m²

Waterproof Membranes & Drainage

3mm Waterproof Floor Membrane Black 40m² - Slimline HDPE

Slimline black 3mm studded HDPE floor membrane, supplied as a 2m x 20m roll covering 40m².

SKU RCD284

£239.28 incl. VAT

Key features

  • Redecorate immediately – no drying out process needed
  • Slimline design with high compressive load stability
  • Waterproof and resistant to salts, roots and contaminants
  • Protects against bacteria, fungi and small organisms
Size: W 2m x L 20m | Coverage 40m² | 3mm Stud Height

Product details

Product description

This premium cavity drain membrane is a streamlined tanking solution made from 100% HDPE for damp proofing floors in new and existing buildings. It is the slimline alternative to our 20mm floor membrane for where saving space is critical. It is typically laid above ground over damp or contaminated substrates before the final flooring goes down, and its 3mm stud profile creates a small air gap for moisture movement and evaporation with very little effect on the finished floor level. The system conforms to Type C (drained protection) standards.

With a higher density than other membranes in its class, it offers enhanced compressive load stability, making it ideal for floors. Being inert, it is highly resistant to water, alkalis, saline solutions, organic acids and other contaminants, and it trims easily to size with scissors. As a key component of Type C waterproofing in basements and other structures where water may get in, it should be integrated with perimeter drainage and sump pump systems.

Applications
  • Damp proofing above-ground floors during renovations
  • Separating new "green" concrete from floor finishes
  • Isolating contaminated floors above ground level
Installation

This membrane is a component of below-ground waterproofing systems and is typically paired with a perimeter system of drainage channel and floor channel; installing the full recommended system gives a comprehensive, effective waterproofing solution. It also works as a high-performance drainage membrane for walls, vaulted soffits and other areas affected by severe water ingress.

Roll the membrane out, studs down, to the edge of the floor – no fixings should be used on floors. Lay the next sheet alongside so that its non-studded flange overlaps the previous sheet to form an overlap joint, then seal the joint with overtape to stop moisture and vapour reaching the floor finish.

Finishing

Once installed, the membrane must always be protected by a suitable surface finish. It can support insulation, underfloor heating, screed and floating floors.

  • Floors: cover with closed-cell insulation before laying tongue and groove flooring, keeping a 10mm expansion joint throughout, or lay a 65mm sand and cement screed. Decorate once the floor or screed is dry. Keep atmospheric moisture below 70% RH during application, and do not install impermeable finishes until the screed moisture is below 75% RH.
  • Stud frame: line up brick plugs with the stud locations and fix battens (at least 25 x 38mm) vertically, attaching the frame to the plugs with No.10 (5mm) screws. If the plugs cannot line up straight, use plasterboard brackets to secure the battens. Make sure screws do not puncture the membrane.
Please Note
  • Floor membranes must be shielded from UV light, which significantly shortens their lifespan; do not store or expose to direct sunlight or freezing conditions.
  • Never line flat soffits below ground with this membrane – it needs a minimum slope of 10%.

Specifications

Size
W 2m x L 20m roll
Coverage
40m² per roll
Composition
100% HDPE
Stud Height
3mm
Total Weight
Approx. 500g/m²
Number of Studs
2500/m²
Colour
Black
Water Drainage Capacity
Approx. 0.86L/s/m
Compressive Strength
250 kN/m²
Temperature Resistance
-30°C to +80°C
Chemical Properties
Chemical resistant
Physical Properties
Safe for drinking water
Fire Resistance
Class E

Quote request

Get a quote for this product

3mm Waterproof Floor Membrane Black 40m² - Slimline HDPE

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy