1.2m x 20m Damp Proof Mesh Membrane - 3mm Thickness

Waterproof Membranes & Drainage

Damp Proof Mesh Membrane Kit 1.2m x 20m - 24m² with Plugs & Washers

Complete 24m² internal damp proofing kit with a 1.2m x 20m roll of 3mm mesh membrane, plaster plugs and sealing washers.

SKU RCD114

£527.96 incl. VAT

Key features

  • 1.2m height for salt banding
  • Complete damp proofing kit
  • Stops salts and moisture; resists water, alkalis, salts and organic minerals
  • Mesh for direct finishes
  • Maintains stability under intense compressive loads
  • Fast, easy installation
  • For DIY & trade use
Size: Kit: W 1.2m x L 20m x T 3mm | Coverage 24m²

Product details

Product description

A complete solution for walls suffering from damp and heavy salt deposits. The 1.2m width is perfect for covering larger areas such as chimney breasts, or for treating walls with high tide marks and salt banding. Quick to install and built for durability, the membrane creates a secure key for plastering, rendering or dot and dab, giving long-lasting internal damp proofing with minimal effort for professional contractors and DIY projects alike.

The membrane is an excellent internal damp proofing solution for hygroscopic salt contamination on a range of substrates, including chimney breasts. Its 1.2-metre height is taller than typical standard mesh membranes to deal more effectively with high tide marks from rising damp. Once existing damp has been treated, it acts as a robust barrier against further moisture and salt damage and a solid foundation for dot and dab plasterboard or direct rendering, while its slim 3mm profile is ideal where working space is limited.

Resolves the effects of salt contamination: salt-affected surfaces can look damp in humid conditions because hygroscopic salts in the wall draw in moisture, creating dark, wet-looking patches that are often mistaken for penetrating or rising damp. The membrane isolates the contaminated substrate from the new finish, removing these signs of moisture.

Made from translucent high-density polyethylene (HDPE), it is designed for damp proofing and waterproofing walls, floors and ceilings in new and existing buildings, above or below ground, on contaminated or damp backgrounds, and supports dry lining or flooring systems. The system is approved for use in Type C (drained protection) constructions to BS 8102:2022. As with all damp proofing and waterproofing projects, it should be integrated with a perimeter drainage and sump pump system.

Kit Contents
1 x Roll of 1.2m x 20m 3mm Meshed Membrane
4 x Plaster Plugs 60mm (bag of 100)
4 x Sealing Washers (bag of 100)
Installation

The kit comes with plaster plugs for fixing the membrane to the wall. Seal each plug by wrapping a sealing washer (supplied) or Butyl Rope firmly around its head before hammering it into place, to create a waterproof seal.

  1. Clean the base to achieve the smoothest possible surface, removing any damaged, loose or disintegrating plaster.
  2. Trim the membrane to size with a sharp blade or scissors.
  3. Fix the membrane to the surface with the mesh side exposed, using the plugs. It can be installed horizontally or vertically.

Approximately 15 plugs per square metre are recommended, with no plug more than 250mm horizontally or vertically from the next. On curved or uneven surfaces, place the plugs closer together so that the mesh is not loose from the wall.

Jointing: the membrane is highly flexible and can easily be moulded around corners. Alternatively, edges can be butt jointed and made watertight with Fleece Overstrip.

Its square 3mm studs handle corner details and surface irregularities well, making it an excellent substrate for lime mortars, renders and plasters, and it gives a highly reliable waterproofing installation when paired with suitable drainage.

Finishing
  • Plaster finish: finish with standard plastering techniques using lightweight plasters such as a renovating plaster. Apply the first coat, filling the studs and covering the mesh, and scratch finish it before it sets, then apply a second coat to a final thickness of 15mm.
  • Dry lining / dot and dab: fix plasterboard panels with conventional bonding plaster in dabs at least 8mm thick, covering at least 50% of the board/membrane surface. This gives a dry surface ready for decoration.
  • Screed: alternatively, a 65mm sand and cement screed may be laid.
  • Once the plaster, dry lining, render or screed is dry, it can be painted or wallpapered using normal decorating materials and techniques. Keep atmospheric moisture below 70% RH during application.
Please Note
  • Do not store or expose to freezing conditions or direct sunlight.
  • All drainage systems must be fully maintained throughout their lifetime.
  • Do not lay impermeable floor finishes until the screed moisture content falls below 75% RH.

Specifications

Size
Kit with W 1.2m x L 20m x T 3mm (stud height) membrane roll
Coverage
24m²
Kit Contents
1 membrane roll, 4 bags of 60mm plaster plugs (100 per bag), 4 bags of sealing washers (100 per bag)
Composition
100% virgin HDPE
Stud Height
3mm
Total Weight
Approx. 500g/m²
Number of Studs
Approx. 2500/m²
Colour
Translucent
Water Drainage Capacity
Approx. 0.86L/s/m
Compressive Strength
250kN/m²
Temperature Resistance
-30°C to +80°C
Chemical Properties
Chemical resistant
Physical Properties
Safe for drinking water
Fire Resistance
Class E
Standard
Approved for Type C (drained protection) to BS 8102:2022

Quote request

Get a quote for this product

Damp Proof Mesh Membrane Kit 1.2m x 20m - 24m² with Plugs & Washers

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy