UV resin binder for bound surfacing – 1.6 kg, 7 kg or 7.5 kg

Resin Bound Driveways

UV Stable Resin Bound Binder 1.6kg, 7kg or 7.5kg - Aliphatic PU Resin

UV-stable aliphatic polyurethane resin binder for resin bound driveways and paths, in 1.6kg, 7kg and 7.5kg units with the catalyst included.

SKU RCD819

£115.58 incl. VAT

Key features

  • Unmatched flexural and compressive strength
  • Independently tested in the UK
  • Chemically superior formulation
  • Catalyst already included
  • Superb coverage rates
  • Fully permeable for drainage – SUDS compliant
  • Wide range of decorative aggregates
  • Ready to use in 12 hours
  • Easy flow system, solvent free
Size: 7kg | Coverage 4m² at 15mm Thickness
UV Stability: Stable

Product details

Product description

This UV-stable resin binder is engineered for exceptional compressive and flexural strength and has been through extensive development and testing against leading alternatives, with independent testing in the UK. Trusted by UK installers for its durability and resilience, it is a clear, binding, solvent-free aliphatic polyurethane resin that permanently binds aggregate together, giving a cost-effective, easy-to-lay finish for large outdoor areas such as driveways, walkways and outdoor spaces in a wide range of decorative finishes. Tested in real-life applications for strength, performance and workability, its easy flow system lays a fully permeable, SUDS compliant surface that is ready to use in 12 hours. The final appearance depends on the aggregate used.

Coverage

Aggregate blends are made up of 3 x 25kg bags of 2-5mm aggregate and 1 x 25kg bag of 1-3mm aggregate.

Preparation

Concrete: clean the surface thoroughly so it is free from debris, dirt, oil and grease – our Floor Degreaser or Concrete Etch and Clean is ideal. Repair cracks, potholes and other damage first so the surface is smooth and even, preventing further damage to the resin bound surface; concrete repair products are recommended. Let the concrete dry completely after cleaning and repairing – this can take several hours or a day or two depending on the weather. Then apply a resin bound primer to ensure good adhesion to the concrete; it also seals the surface and stops moisture penetrating.

Asphalt/tarmac: allow newly laid asphalt to oxidise for at least seven days. Clean off all debris, dirt, grease and oil (a degreaser is ideal) and repair surface damage; deep cracks or damage may need further assessment to confirm the base is suitable. Do NOT use a primer – apply directly to the asphalt/tarmac. Make sure surface temperatures are not extremely high during application, as dark tarmac and asphalt heat up.

Mixing & Application
  1. Mix Part A at slow speed with a mortar drill and paddle mixer until homogenous.
  2. Add 100% of Part B and mix for another 90 seconds, to a pearly, smooth, viscous liquid.
  3. Put the aggregate (typically up to 100kg) and an optional 6.25kg of specialised sand in a forced action pan mixer for at least 60 seconds.
  4. Add the mixed resin to the tumbling aggregate and mix for 60-90 seconds, taking care not to over-mix.
  5. Move to the application area and start laying straight away – the pot life is 10 minutes, so mix with aggregate immediately; the working life is 20 minutes at 20°C.
  6. Lay the mix and smooth it to the desired thickness with a flat trowel for main areas and a gauging trowel for edges. Once an even thickness and coverage is achieved, pour the next mix and repeat until the surface is complete.
  7. Clean the trowel periodically with a tool cleaning solvent to remove excess aggregate and resin, and clean all equipment with solvent at the end so resin does not cure on it.

For peak efficiency, two people can work together so the job is finished within the working life. Make sure you are trained in or familiar with all the equipment, and that your team is competent and prepared; carry out a thorough risk assessment before starting. Wear work gloves and protective glasses or goggles when mixing and working with resins, and wash skin thoroughly with soap and water if exposed.

Please Note
  • Resin bound surfacing must be laid against a hard edge and cannot be feather edged, as this weakens the structure – lay it in an area bounded by walls, or use edging profiles at the chosen depth.
  • Avoid adverse weather and rainfall for 24 hours.

Specifications

Size
7kg, 1.6kg, 7.5kg (Part A resin + Part B activator, pre-weighed; weight is for the whole unit)
UV Stability
Stable
Composition
Clear aliphatic polyurethane resin, solvent free
Product Components
2 pack system – resin + activator (catalyst included)
Coverage
1m² per 1.6kg at 15mm thick; 4m² per 7-7.5kg at 15mm thick
Aggregate
1.6kg with 1 x 25kg bag; 7kg or 7.5kg per 100kg of bagged aggregate
Pot Life (at 20°C)
10 Minutes
Working Life (at 20°C)
20 Minutes
Touch Dry (at 25°C)
1-2 hours
Foot Traffic (at 25°C)
6-12 hours
Light Vehicle Traffic (at 25°C)
24 hours
Heavy Vehicle Traffic (at 25°C)
36 hours
Adverse Weather/Rainfall
Avoid for 24 hours
Application Tools
Flat trowel, gauging trowel
Usage Location
Exterior
Shelf Life
12 Months

Quote request

Get a quote for this product

UV Stable Resin Bound Binder 1.6kg, 7kg or 7.5kg - Aliphatic PU Resin7kg | Coverage 4m² at 15mm Thickness / Stable

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy