Epoxy Primer 2-Part System for Enhanced Adhesion

Primers

Epoxy Floor Primer 2-Part Solvent Free Clear Sealer - 1kg to 10kg

Low viscosity, solvent-free two-part epoxy primer that seals surfaces before painting, available in 1kg, 2.5kg, 5kg and 10kg kits.

SKU RCD648

£97.32 incl. VAT

Key features

  • Easy to mix and apply
  • Two part epoxy (includes Part A and Part B)
  • Excellent adhesion and sealing qualities
  • Superb coverage
  • Solvent free
Size: 1kg | Coverage 5m²

Product details

Product description

This high-quality, general purpose epoxy floor primer makes an effective base coat for a wide range of surfaces before painting. Its low viscosity industrial twin pack formulation absorbs deeply into the existing substrate, cures stronger than concrete and seals effectively, giving a strong, durable bond and leaving a clear finish. It ensures resin paint systems adhere to concrete and other surfaces, and improves the coverage and quality of finish for epoxy paints and polyurethane resin systems.

Priming before applying Epoxy Floor Paint matters for three reasons:

  • It creates a strong bond between the paint and the substrate, so the paint adheres well and is less likely to peel or flake over time – especially important in high-traffic areas or where the surface sees regular wear and tear.
  • It helps stop moisture penetrating the surface, which can damage the substrate and compromise the paint – important where there is a risk of water damage, such as garages or warehouses.
  • It gives a smooth, even base coat that improves the coverage and quality of the top coat, for a professional, uniform finish with a high level of protection against wear.
Coverage
  • 1kg: 5m²
  • 2.5kg: 12.5m²
  • 5kg: 25m²
  • 10kg: 50m²

Coverage rates depend on the porosity of the surface.

Preparation

Clean the surface to be primed thoroughly. Old paint finishes should be removed if they are flaking at all, and the surface sanded to create a texture (a mechanical key). For floors, mechanical preparation (shot-blasting or grinding) always gives the best results; if that is not possible, sanding or our Concrete Etch and Clean is a good alternative (Etch and Clean is only suitable for bare concrete). Concrete should be free from dust and laitance through sanding or wire brushing, and blow holes and defective concrete should be made good with a repair mortar. Once fully abraded, sweep and vacuum away all remaining dust, loose material and contaminants.

Mixing & Application

The ambient temperature should be at least 7°C when applying.

  1. Mix Part A on its own with a mixing paddle on an electric drill for about 1 minute, then add ALL of Part B and mix for another 90 seconds until a uniform colour is achieved, keeping the paddle in suspension to avoid mixing air into the unit.
  2. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  3. Begin applying immediately with a nylon-bonded, resin-suitable roller or brush, using a consistent method. Cross roll floor areas for an even application with minimal marking, and use several people on large areas.
  4. Use a brush around the edges to cut in (a second pair of hands is useful for this stage).
  5. Re-coat as soon as the first coat has started curing and is no longer tacky to touch.
  6. The cured final coat is fine for foot traffic and ready for further coats of primer or your first coat of paint.

The pot life is 20 minutes: once the parts are mixed the product starts to chemically cure, so remove it from the tin within this window. 100% of the product must be used in a single application and cannot be stored for later use. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply the product before it becomes unworkable.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • This product is NOT self levelling.
Please Note
  • Do not apply at temperatures below 7°C and do not expose to freezing conditions.
  • Temperatures below 20°C will slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until 7 days after application.
  • Do not apply to wet or uncured concrete.

Specifications

Size
1kg, 2.5kg, 5kg, 10kg
Appearance
Clear
Composition
Epoxy Resin of Low Viscosity
Substrates
Bare Concrete, Wood, Screeds, Steel
Product Components
Resin (Part A) + Activator (Part B) – 2 pack system
Typical Installations
Base coat for installations such as garages, factories, warehouses, showrooms, etc.
Solvent Content
Solvent Free
Consumption Rate
0.2-0.3kg/m²
Coverage
5m²/kg
Pot Life (at 20°C)
20 Minutes
Working Life
30 Minutes
Touch Dry Time (at 20°C)
8-12 Hours
Re-coat Time (at 20°C)
8-12 Hours
Traffic/Drying Time (at 20°C)
12-24 Hours
Application Tools
Roller, Brush
Usage Location
Interior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Epoxy Floor Primer 2-Part Solvent Free Clear Sealer - 1kg to 10kg1kg | Coverage 5m²

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy