5kg Metal and Wood Primer for Resin Paint Applications

Primers

Metal and Wood Epoxy Primer for Resin Paints - 1kg to 10kg Clear

Clear, solvent-free two-part epoxy primer that seals and prepares metal and wood surfaces for resin paints, available in 1kg to 10kg kits.

SKU RCD640

£97.32 incl. VAT

Key features

  • Heavy duty
  • 2 part epoxy system
  • Solvent free
  • Excellent adhesion and sealing qualities
  • Superb coverage
Size: 1kg | Coverage up to 5m²

Product details

Product description

This low viscosity, solvent-free epoxy primer seals and prepares metal and wood surfaces for the resin paint systems that follow. It is specially designed to give superb quality adhesion between resin paint and metal or wood substrates, making it an ideal base coat that ensures later paint coatings adhere correctly.

It leaves a heavy duty, durable clear finish and is commonly used for sealing wood flooring or metal steps. The protective barrier it forms resists wear and tear, even in high-traffic areas, while the transparent dry film lets the natural look of the material show through. On wooden floors it helps safeguard against moisture and environmental factors to extend their lifespan, and on metal steps it acts as a shield that prevents corrosion and prolongs their use.

Coverage
  • 1kg: up to 5m²
  • 2.5kg: up to 12.5m²
  • 5kg: up to 25m²
  • 10kg: up to 50m²

Coverage rates depend on the porosity of the surface.

Preparation

Clean the surface to be primed thoroughly, removing any dust or contaminants. Old paint finishes should be removed if they are flaking at all, and the surface sanded to create a texture (a mechanical key). Wooden substrates need sanding – lightly abrade them to give the primer a mechanical key. Steel surfaces should be shot or grit blasted to a nominal Sa 2.5 Swedish standard. When preparing a floor, mechanical preparation (shot-blasting or grinding) always gives the best results; if that is not possible, sanding or our Concrete Etch and Clean is a good alternative (Etch and Clean is only suitable for bare concrete). Once fully abraded, sweep and vacuum away any remaining dust or contaminants.

Mixing & Application

The ambient temperature should be at least 7°C when applying.

  1. Mix Part A on its own with a mixing paddle on an electric drill for about 1 minute, then add ALL of Part B and mix for another 90 seconds until a uniform colour is achieved, keeping the paddle in suspension to avoid mixing air into the unit.
  2. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  3. Begin applying immediately with a nylon-bonded, resin-suitable roller or brush, using a consistent method. Cross roll floor areas for an even application with minimal marking, and use several people on large areas.
  4. Use a brush around the edges to cut in (a second pair of hands is useful for this stage).
  5. Apply subsequent coats of primer or paint once the primer has cured and is touch dry.

The pot life is 20 minutes: once the parts are mixed the product starts to chemically cure, so remove it from the tin within this window. It then stays workable on the surface for up to 40 minutes. 100% of the product must be used in a single application and cannot be stored for later use. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply the product before it becomes unworkable.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • This product is NOT self levelling.
Please Note
  • Do not apply at temperatures below 7°C and do not expose to freezing conditions.
  • Temperatures below 20°C will slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until 7 days after application.
  • Do not apply to wet or uncured concrete.

Specifications

Size
1kg, 2.5kg, 5kg, 10kg
Appearance
Transparent Coating
Composition
Unfilled Epoxy Resin of Low Viscosity
Substrates
Concrete, Wood and Most Other Flooring Compositions
Product Components
Resin (Part A) + Activator (Part B) – 2 pack system
Typical Installations
Pre-paint installation in warehouses, garages, factories, etc.
Solvent Content
Solvent Free
Consumption Rate
0.2-0.3kg/m²
Coverage
5m²/kg
Pot Life (at 20°C)
20 Minutes
Working Time
Up to 40 minutes
Touch Dry Time (at 20°C)
8-12 Hours
Re-coat Time (at 20°C)
8-12 Hours
Traffic/Drying Time (at 20°C)
12-24 Hours
Application Tools
Roller, Brush
Usage Location
Interior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Metal and Wood Epoxy Primer for Resin Paints - 1kg to 10kg Clear1kg | Coverage up to 5m²

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy