Car Park Line Marking Paint – 1kg or 2.5kg

Line Marking Paint

Car Park Line Marking Paint 1kg or 2.5kg - Polyaspartic, 60 Minute Cure

Rapid-curing two-part polyaspartic line marking paint for car parks, roads and walkways, in 1kg and 2.5kg packs and 10 colours.

SKU RCD868

£118.22 incl. VAT

Key features

  • Perfect for car parks, walkways and zone marking
  • Cures in just 60 minutes
  • Cold curing formula
  • Weatherproof and permanent
  • Easy to mix and apply, excellent adhesion
  • Suitable for internal and external use
  • Two coats recommended
  • Great coverage – 50m at 100mm width per 1kg
Colour: Light Grey
Size: 1kg | Coverage 50 linear m at 100mm Width per coat

Product details

Product description

This strong polyaspartic coating lays thick, long-lasting, high-visibility line markings for demarcating car parks, roads, walkways, entrance ways and other zones. It cures rapidly and is ready for traffic in just one hour, saving time and money. Easy to apply indoors and outdoors without the cost or inconvenience of machinery, you simply mix Parts A and B and apply by brush or roller onto concrete, tarmac, asphalt and other smooth car park surfaces.

Heavy-duty enough to survive harsh weather and heavy, regular vehicle traffic, it is great for white or yellow lines on tarmac and comes in a wide range of other colours to suit any job.

Coverage
  • 1kg: 50 linear metres at a width of 10cm
  • 2.5kg: 150 linear metres at a width of 10cm

Rates are per coat; in most cases 2 coats are advised.

Preparation

Remove traces of existing lines first, especially if flaky, as they reduce adhesion. Make good any cracks, damage or defects in the concrete with repair compounds. Where existing lines remain, clean and lightly abrade them once dry, then apply the paint directly over the top. Make sure the concrete is clean and free from dust, laitance, oil etc. – a wire brush is generally enough to lift debris – and vacuum away all loose material after brushing or sanding.

Mixing & Application

We advise an ambient temperature of at least 7°C, although the product can cure as low as 0°C.

  1. Mark off the area with masking tape or stencils for clean, tidy lines.
  2. Mix Part A on its own with a mixing paddle on an electric drill for about 2 minutes, then add ALL of Part B and mix for another 90 seconds until the colour and texture are uniform and the curing agent has fully dispersed, keeping the paddle in suspension to avoid mixing in air.
  3. Pour the entire contents of the tin into a plastic paint scuttle or tray.
  4. Begin applying immediately with a nylon-bonded, resin-suitable roller and epoxy sleeve, using a consistent, thorough method and cross rolling for an even, smooth finish.
  5. Re-coat as soon as the first coat has started curing and is no longer tacky to touch. As the paint dries quickly, remove the masking tape before it fully cures.
  6. The cured final coat is fine for foot traffic; keep cars and heavy objects off until the car traffic time has passed.

The pot life is 20 minutes: once mixed, the paint starts to chemically cure, so remove it from the tin within this window. It then stays workable for up to 30 minutes. 100% of the mixed material must be used in a single application. Pot life is the time to harden in the pot after the hardener is added; working time is the time available to apply it before it becomes unworkable.

Wear appropriate PPE such as gloves and safety goggles. If the product contacts skin, wash it off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause problems with activation.
  • This product is NOT self levelling.
Please Note
  • Do not apply on new or wet concrete (under 21 days old, or with a residual moisture content of 6% or higher).
  • Do not store in freezing conditions.
  • Temperatures below 20°C will slow curing and drying.
  • Do not expose to chemicals, wash or allow water to rest on the surface until full chemical cure (2 days).

Specifications

Size
1kg, 2.5kg (Part A + Part B – weight is for the whole pack)
Colours
Light Grey, Dark Grey (Slate Grey), Sky Blue, Leaf Green, Tomato Red, Golden Yellow, White, Black, Traffic Red, Traffic Yellow
Appearance
Smooth, high visibility lines
Composition
Polyaspartic line marking paint, solvent free
Substrates
Concrete, tarmac and asphalt
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Car park line marking, walkways, zone marking, road markings, disabled parking bays, etc.
Thickness
100 Microns/Coat
Coverage
50 linear metres at 100mm width per 1kg
Recommended Coats
2
Pot Life
20 Minutes
Working Life
30 Minutes
Re-coat Time (at 20°C)
60 Minutes
Re-coat Time (at 10°C)
1-2 Hours
Drying Time (at 20°C)
24 Hours
Car/Industrial Traffic Time (at 20°C)
12 Hours
Car/Industrial Traffic Time (at 10°C)
16 Hours
Full Chemical Cure Time (at 20°C)
2 Days
Minimum Temperature
0°C
Application Tools
Roller with epoxy sleeve, brush
Usage Location
Interior/Exterior
Shelf Life
12 Months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

Car Park Line Marking Paint 1kg or 2.5kg - Polyaspartic, 60 Minute CureLight Grey / 1kg | Coverage 50 linear m at 100mm Width per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy