5 Litres Reflective Road Marker Paint

Line Marking Paint

Reflective Road Marking Paint 5L - White or Yellow, Glass Bead Line Paint

5 litre one-pack reflective road marking paint with glass beads, covering 60m² (600 linear metres at 10cm wide) per coat.

SKU RCD604

£237.04 incl. VAT

Key features

  • Quick drying
  • Highly durable and UV stable
  • Highly reflective
  • Good slip resistance
  • Easy-to-use one-pack product
  • Professional finish
  • Superb coverage rates
Colour: White
Size: 5 Litres | Coverage 60m² (600m at 10cm width) per coat

Product details

Product description

A heavy-duty, chlorinated rubber-based line marking paint for concrete, asphalt and tarmac. Quick drying and extremely tough, it is a cost-effective, high-strength solution, and its reflective glass beads give bright, bold markings that reflect car headlights in dim or dark areas.

Supplied as a one-pack product, it needs no mixing or extra parts. It is easy to use, and its quick drying time suits both DIY and industrial users, keeping downtime to a minimum. Designed mainly for general road markings such as zebra crossings, parking bays, road lines and runways, it is also used for traffic signals, cycle lanes, pavements, parking spaces and some sports and athletic facilities. It is a durable alternative to thermoplastic road markings where machinery access is limited, such as factory floors, school playgrounds and multi-storey car parks. It gives a tough, reflective semi-gloss finish in white or yellow and is highly durable and UV stable with good slip resistance.

Coverage
  • 5 litres: 60m² per coat
  • 5 litres: 600 linear metres at a width of 10cm per coat

In most cases 2 coats are advised; surfaces of higher than normal porosity may need further coats.

Preparation

Remove traces of existing lines before painting, especially if they are flaky, as these reduce adhesion. The concrete should be at least 21 days old with residual moisture below 6%, and clean and free from dust, laitance, grease, oil, curing compound and existing paint. Make good cracks, pinholes, damage and defects with a reliable repair compound; once dry, clean and lightly abrade existing lines before painting over them. Mechanical treatment such as vacuum grit blasting is preferred, as it gives a key for the coating; otherwise a wire brush is generally enough to lift debris. Vacuum away all loose material after brushing or sanding.

Application
  1. Stir the paint thoroughly before use. If using several tins, intermix them in a scuttle for an even colour.
  2. Apply the first coat evenly by roller, brush or pad in a cross-rolled fashion.
  3. Protect from the elements and leave to dry for 12 hours.
  4. Apply the second coat – a minimum of two coats is recommended – and leave to dry completely before use.
Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • This product is not self levelling.
Please Note
  • Do not apply on new or wet concrete (under 21 days old, or with a residual moisture content of 6% or higher).
  • Do not apply below 7°C or expose to freezing conditions; temperatures below 20°C slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until 7 days after application.
  • Wear suitable PPE such as gloves and safety goggles. If the product gets on skin, wash off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Specifications

Size
5 Litres
Appearance
Finely textured, reflective coloured semi-gloss finish
Composition
Solvent-based chlorinated rubber with reflective glass beads
Substrates
Concrete, asphalt, tarmac
Product Components
One-pack system
Typical Installations
Floor markings on roads, car parks, warehouses, airport runways, school yards
Consumption Rate
Up to 120ml/m²
Coverage
Up to 12m²/L – 60m² or 600 linear metres at 10cm width per 5L per coat
Touch Dry Time
1 hour
Drying Time (at 20°C)
4 hours
Re-coat/Foot-traffic Time (at 20°C)
12 hours
Recommended Coats
2
Application Tools
Roller, brush, pad
Usage Location
Exterior
Shelf Life
12 months
Storage Temperature
10 - 25°C
Colours
White, Yellow

Quote request

Get a quote for this product

Reflective Road Marking Paint 5L - White or Yellow, Glass Bead Line PaintWhite / 5 Litres | Coverage 60m² (600m at 10cm width) per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy