2.5kg Epoxy Line Marking Paint

Line Marking Paint

Epoxy Line Marking Paint 1kg to 10kg - Heavy Duty Floor Demarcation

Heavy-duty thixotropic epoxy line marking paint for industrial floors in 1kg to 10kg packs – a 2.5kg unit marks up to 50m of 10cm-wide line.

SKU RCD606

£81.26 incl. VAT

Key features

  • Thixotropic epoxy paint
  • Thin and easy to apply
  • Rapidly thickens for permanent, durable lines
  • Low bleed for clear lines with painter's tape or stencils
  • Excellent chemical and abrasion resistance
  • Highly visible
Colour: Golden Yellow
Size: 1kg

Product details

Product description

A heavy-duty, high build epoxy line marking paint with excellent resistance to harsh chemicals and abrasion and exceptionally high visibility. Its engineered thixotropic viscosity is thin and easy to apply, then rapidly thickens to form permanent, durable lines – ideal for clearly separating walkways from working areas in factories, warehouses and other busy industrial spaces. Low bleed gives clean lines with painter's tape or stencils.

Mainly used for clear, long-lasting demarcation in warehouses and factories, it can also provide robust chemical- and abrasion-resistant protection for wash boxes, process tanks and silos. Thanks to its high chemical resistance, it is suitable for lining chemical spillage areas and can be applied vertically onto bunds. It gives a highly visible, coloured high gloss finish, and typical installations also include walkways, storefronts and trade counters.

Coverage

A 2.5kg unit yields up to:

  • 50m of line at 10cm width and 0.5mm thickness, or
  • 100m of line at 10cm width and 0.25mm thickness
Preparation

Remove traces of existing lines before painting, especially if flaky, as these reduce adhesion; otherwise clean and lightly abrade existing lines and paint directly over them. Make sure the concrete is clean and free from dust, laitance and oil. Make good cracks, pinholes, damage and defects with a repair compound or repair mortar. Mechanical treatment is preferred, as it gives a key for the coating; a wire brush is generally enough to lift debris, and all loose material must be vacuumed away. Use a suitable primer, especially on new or oil-contaminated concrete. Steel should be shot or grit blasted to a nominal Sa 2.5 (Swedish standard).

Mixing & Application

Apply at an ambient temperature of at least 7°C.

  1. Mask off the area to be painted with tape or use stencils for clean, tidy lines.
  2. Mix Part A on its own with a paddle on an electric drill for about 2 minutes to disperse the pigment. Add ALL of Part B and mix for another 90 seconds, keeping the paddle submerged to avoid mixing in air, until the colour and texture are uniform.
  3. Pour the entire contents into a plastic paint scuttle or tray – all mixed material must be used in one application.
  4. Begin applying immediately with a nylon-bonded, resin-suitable epoxy roller, cross-rolling for an even, smooth finish.
  5. A typical system is 1 coat of primer and 1 coat of line marking paint, applied within 24 hours of the primer curing. If re-coating, do so once the first coat is no longer tacky – 8-12 hours at 20°C or 16-24 hours at 10°C.

Pot life is 20 minutes – once mixed, the paint starts to cure chemically after this time, so remove it from the tin within this window. It stays workable on the floor for up to 40 minutes.

Cure Times
  • Re-coat: 16-24 hours at 10°C, 8-12 hours at 20°C
  • Car traffic: 24-48 hours at 10°C, 12-24 hours at 20°C
  • Industrial traffic: 72 hours at 10°C, 48 hours at 20°C
  • Full chemical cure: 7 days at 20°C – avoid chemicals, including water, until then
Useful Information
  • Use one roller sleeve per coat.
  • Do not split the product. Taking smaller quantities from each tin, even if measured correctly, can cause activation problems.
  • This product is not self levelling.
Please Note
  • Do not apply on new or wet concrete (under 28 days old, or with a residual moisture content of 6% or higher). Concrete must have a damp proof membrane beneath it for epoxy coatings to be applied.
  • Do not apply below 7°C or expose to freezing conditions; temperatures below 20°C slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until 7 days after application.
  • Not UV stable – do not expose to prolonged sunlight, as it will discolour.
  • Wear suitable PPE such as gloves and safety goggles. If the product gets on skin, wash off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Specifications

Size
1kg, 2.5kg, 5kg, 10kg (whole pack weight, Part A + Part B)
Appearance
Coloured, high gloss finish
Composition
Thixotropic epoxy resin combined with inert fillers, solvent free
Substrates
Concrete, render, brickwork, blockwork etc.
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Factory, industrial and warehouse floors, walkways, storefronts, trade counters
Coverage
2.5kg up to 50m of line at 10cm width / 0.5mm thick, or 100m at 10cm width / 0.25mm thick
Thickness
250-500 microns per coat
Pot Life
20 minutes
Working Life
40 minutes
Re-coat/Foot-traffic Time (at 20°C)
8-12 hours
Drying Time (at 20°C)
12-24 hours
Minimum Temperature
7°C
Recommended Coats
1
Application Tools
Epoxy roller sleeve and frame, brushes
Usage Location
Interior
Shelf Life
12 months
Storage Temperature
10 - 25°C
Colours
Golden Yellow, White, Traffic Red, Traffic Yellow

Quote request

Get a quote for this product

Epoxy Line Marking Paint 1kg to 10kg - Heavy Duty Floor DemarcationGolden Yellow / 1kg

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy