High-build epoxy garage floor paint, solvent-free, multiple colours

Garage Floor Paint

High Build Epoxy Garage Floor Paint 1kg to 10kg - Solvent Free Gloss

Two-part, solvent-free high build epoxy garage floor paint in 1kg, 2.5kg, 5kg and 10kg packs, giving concrete a tough, easy-to-clean high-gloss finish.

SKU RCD1294

£83.98 incl. VAT

Key features

  • 4x thicker than standard floor paints
  • Made for DIY application
  • Tough, easy-to-clean professional gloss finish
  • Oil and petrol spill resistant
  • 100% solids, solvent-free, low VOC epoxy
  • Resin and hardener included
  • Surface usable in 24 hours
  • Superb coverage
Colour: Light Grey
Size: 1kg | Coverage 3-4m² per coat

Product details

Product description

Turn bare concrete into a finished floor you can take pride in. This UK-made, two-part epoxy resin coating seals and protects concrete, steel and other substrates with a durable, high-gloss finish designed for everyday foot traffic and vehicles. Whether your garage is used for parking, working on projects or storage, it gives the floor a practical upgrade. It is suitable for DIY application and is also used in workshops, service centres, factories, industrial storage areas, basements and commercial spaces where floors need to withstand regular use.

The high-build formula is 4x thicker than standard floor paints, creating a substantial protective coating over prepared concrete. Made with 100% solids epoxy resin, it is solvent free and not water-based, giving a durable resin finish rather than simply adding colour. Once cured it resists foot traffic, vehicles and oil and petrol spills, and the smooth, sealed gloss surface is easier to maintain than bare concrete. It is manufactured, tested and packed in the UK.

Coverage

Two coats over the appropriate primer are recommended. Measure the length and width of the floor in metres and multiply them to get the area. Coverage per coat may vary with the condition and texture of the floor.

Pack Size Coverage per Coat Buy for Two Coats
1 kg 3–4 m² 2 × 1 kg packs
2.5 kg 8–10 m² 2 × 2.5 kg packs
5 kg 17–20 m² 2 × 5 kg packs
10 kg 35–40 m² 2 × 10 kg packs

Example: a 4m × 4m garage has a floor area of 16m², so two 5kg packs give enough paint for two coats, using one complete pack per coat. Choose separate complete packs for each coat – once mixed, the paint must be used and cannot be saved for the following day.

What's Included

Every pack includes Part A epoxy resin and Part B hardener in pre-weighed quantities. The advertised weight is the combined weight of both parts (a 5kg pack contains 5kg in total). Primer and tools are purchased separately: you will need an epoxy-suitable roller and frame, brushes for the edges, a plastic paint scuttle or tray, a mixing paddle with a suitable electric drill, a fresh roller sleeve for each coat, and protective gloves, clothing and eye protection. Our Floor Paint Application Kit brings the main mixing and application tools together (you'll still need your own drill and roller handle). For primer, paint and tools together, see the Single Garage Floor Paint Bundle or Double Garage Floor Paint Bundle.

Choosing a Primer

The standard system is one coat of the appropriate primer followed by two coats of this epoxy paint. A primer should be used especially on new or oil-contaminated concrete.

Primer supports the coating's bond to the floor; it does not replace cleaning, preparation or repairs. Check the chosen primer's coverage and application instructions when calculating your order.

Preparation

Make sure the concrete is clean and free from dirt, dust, laitance, oil, loose material and any flaking paint. Repair holes, pinholes and defective concrete with a repair mortar before coating. Mechanical preparation such as grinding or shot-blasting is preferred, as it creates a mechanical key for the coating; for suitable bare concrete, Concrete Etch and Clean is an alternative. Steel surfaces should be shot blasted or grit blasted to a nominal Sa 2.5 Swedish standard. Thoroughly sweep and vacuum after preparation and make sure the floor meets the moisture requirements below.

Mixing & Application
  1. Apply the primer chosen for your floor, following its instructions. Have the epoxy paint and tools ready before the primer's recoating window – the first coat of paint should be applied no longer than 24 hours after the primer has cured or is dry to touch.
  2. Gently stir Part A for 2 minutes to disperse the pigment, then pour 100% of Part B into the Part A tin and mix thoroughly with a paddle on a drill until the colour and texture are uniform. Keep the paddle below the surface to minimise trapped air. Do not split packs – only mix the next pack when you're ready to apply it.
  3. Transfer the mixed paint into a plastic scuttle or tray and begin applying immediately with an epoxy roller sleeve, using a brush to cut in around the edges. Cross-roll flat areas for an even, smooth finish and work methodically down the floor. Large areas may need several people.
  4. Apply the second coat with a freshly mixed complete pack and a new roller sleeve once the first coat has reached the re-coat stage, and no longer than 24 hours after the first coat has cured.

The pot life is about 20 minutes and the working time on the floor up to 40 minutes – these are not waiting periods, so have everything prepared before mixing and start applying straight away. Apply at an ambient temperature of at least 7°C; cooler conditions extend curing times. Wear appropriate PPE such as gloves and protective safety goggles; if the product contacts skin, wash off immediately with plenty of soap and water and seek medical advice if discomfort occurs.

Cure Times
  • Re-coat time: 16-24 hours at 10°C; 8-12 hours at 20°C
  • Car traffic time: 24-48 hours at 10°C; 12-24 hours at 20°C
  • Industrial traffic time: 72 hours at 10°C; 48 hours at 20°C
  • Full chemical cure: 7 days at 20°C

A surface that is dry to the touch is not necessarily ready for vehicles, washing or chemicals. Avoid water, washing and chemicals for the first 7 days while the coating reaches full chemical cure, and allow longer in cooler conditions.

Please Note
  • Do not apply on new or wet concrete (under 28 days old or with a residual moisture content of 6% or higher). The concrete must have a damp proof membrane beneath it for epoxy coatings to be applied.
  • Do not apply below 7°C or expose to freezing conditions; temperatures below 20°C will slow curing and drying times.
  • Do not expose to chemicals, wash or allow water to rest on the surface until 7 days after application.
  • Not UV stable – prolonged or heavy sunlight will cause discolouration. Intended for indoor use.
  • After mixing, 100% of the material must be used in a single application; it cannot be stored for later use.
  • Colours on screens and in photographs can vary with lighting and display settings.
FAQs

Is this epoxy self levelling?
No. It is a roller and brush applied epoxy floor coating that gives a thick resin finish over your existing concrete, but it is not a self-levelling screed and will not flatten an uneven floor or fill holes.

Can I use it in a workshop?
Yes. As well as domestic garages, it suits workshops, service centres and other indoor commercial concrete floors. Choose the appropriate primer, prepare the surface properly and let the coating cure before returning equipment or vehicles.

Can I paint over an existing garage floor coating?
Existing paint must be assessed first. Remove loose or flaking finishes and mechanically prepare the surface to create a key; the remaining coating must be sound and securely bonded.

Is an anti-slip version available?
This product gives a smooth, high-gloss finish that still has acceptable slip resistance. For a textured surface with extra slip resistance, choose Anti-Slip Epoxy Floor Paint in Fine, Medium or Coarse profiles.

Can I use it outside or in sunlight?
It is intended for indoor use and is not UV stable. Where an indoor floor gets regular sunlight, a coloured UV-stable finish such as Polyaspartic Rapid Dry Floor Paint may be needed.

Can I use it on a wooden floor?
For timber floors, a more flexible coating such as Polyaspartic Rapid Dry Floor Paint is preferred.

Is a clear finish available?
This is a coloured epoxy paint. For a transparent coating, see our Clear Epoxy Floor Paint.

Can I save mixed paint for the second coat?
No. Once Part A and Part B are combined the epoxy cures and cannot be stored. Buy separate complete packs for each coat.

Specifications

Size
1kg, 2.5kg, 5kg, 10kg
Colours
Light Grey, Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Light Ivory, Leaf Green, Fern Green, Tomato Red, Golden Yellow, Vermillion, Jet Black, White, Sky Blue, Traffic Red
Appearance
Smooth, high gloss finish
Composition
100% solids formula
Substrates
Concrete, screed, steel
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Garages, workshops, commercial units and more
Solvent Content
Solvent free, low VOC
Pot Life
20 minutes
Working Life
40 minutes
Re-coat/Foot-traffic Time (at 20°C)
8-12 hours
Drying Time (at 20°C)
12-24 hours
Thickness
250 microns per coat
Consumption Rate
0.25-0.30kg/m²
Coverage
Up to 4m² per kg
Recommended Coats
2
Minimum Temperature
7°C
Application Tools
Epoxy roller sleeve and frame, brush
Usage Location
Interior
Shelf Life
12 months
Storage Temperature
10 - 25°C

Quote request

Get a quote for this product

High Build Epoxy Garage Floor Paint 1kg to 10kg - Solvent Free GlossLight Grey / 1kg | Coverage 3-4m² per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy