Fast Cure Garage Floor Paint Bundle 1 Coat Primer + 2 Coats Epoxy

Floor Paint Kits & Bundles

Fast Cure Epoxy Garage Floor Paint Kit - Primer + 2 Coats, 10m² to 80m²

Complete fast cure epoxy garage floor kit – 1 coat of primer, 2 coats of high gloss epoxy paint and tools – in kits covering up to 10m² to 80m².

SKU RCD483

£531.36 incl. VAT

Key features

  • Exceptionally fast cure time – rapid re-coat and car traffic cure
  • UK-manufactured fast cure epoxy resin
  • High gloss finish
  • Incredibly long-lasting finish
  • Oil tolerant, easy to clean and maintain
  • Low VOC and solvent free
Colour: Mid Grey (Silver Grey)
Size: Kit | Coverage up to 10m² (1 coat primer + 2 coats paint)

Product details

Product description

A fast-curing, high-performance coating system that lets you paint your garage in one day. Designed for lower temperatures or when a fast return to service is needed, this DIY-friendly kit includes everything you need. The incredibly hard-wearing paint withstands oil and petrol as well as heavy foot and vehicle traffic.

Ideal if you want a rapid cure, and great for jobs in colder months, the kit lets you finish the job the same day rather than the up to 3 days a standard system can take, and return the garage to full service within 24-36 hours. It contains a quick-cure primer and enough quick-cure epoxy garage floor paint for 2 coats, made with high-quality UK-manufactured epoxy resin. Easy to apply, the paint undercuts the drying time of regular high build epoxy, is oil tolerant, low VOC and solvent free, and gives a smooth, professional high gloss finish in a choice of colours that is easy to clean and maintain – up to 5 x thicker than standard garage floor paints.

What's Included

These are relative quantities – product amounts depend on the coverage you select.

Preparation

Make sure the concrete is clean and free from dust, laitance and oil. Remove any flaking old paint and sand the surface to create a mechanical key. Mechanical preparation (shot blasting or grinding) is always best; if that is not possible, sanding or concrete etch and clean is a good alternative (etch and clean is only suitable for bare concrete). Make good pinholes and defective concrete with a repair mortar. Steel surfaces should be shot or grit blasted to a nominal Sa 2.5 (Swedish standard). After abrading, thoroughly sweep and vacuum away all dust and contaminants.

Mixing & Application

Apply at an ambient temperature of at least 7°C.

  1. Mix Part A of the primer on its own with a paddle on an electric drill for about 1 minute. Add ALL of Part B and mix for another 90 seconds, keeping the paddle submerged to avoid mixing in air, until the colour and texture are uniform.
  2. Pour the entire contents into a plastic paint scuttle or tray – all mixed material must be used in one application.
  3. Immediately apply the primer with a nylon-bonded, resin-suitable roller, cross-rolling for an even, smooth finish.
  4. Cut in around the edges with a brush – a second pair of hands helps here.
  5. Once the primer is no longer tacky (re-coat time 3 hours at 20°C), apply the first coat of paint, within 24 hours of the primer curing.
  6. Repeat steps 1-4 for each coat of fast cure epoxy paint. Apply the second coat once the first is no longer tacky – 2.5 hours at 20°C or 5-8 hours at 10°C – and within 24 hours of the first coat curing.

Paint pot life is 20 minutes – once mixed, it starts to cure chemically after this time, so remove it from the tin within this window.

Cure Times
  • Re-coat: 5-8 hours at 10°C, 2.5 hours at 20°C
  • Car traffic: 18-24 hours at 10°C, 10-12 hours at 20°C
  • Industrial traffic: 48 hours at 10°C, 24 hours at 20°C
  • Full chemical cure: 7 days at 20°C – avoid chemicals, including water, until then
Useful Information
  • Use one roller sleeve per coat – two coats need two roller sleeves.
  • Direct sunlight may discolour the coating; for areas exposed to sunlight, a polyaspartic fast cure coating is recommended.
  • Do not split the product. Taking smaller quantities from each tin, even if measured correctly, can cause activation problems.
  • This product is not self levelling.
  • Bundles are sold as complete sets; individual units cannot be returned or refunded.
Please Note
  • Do not apply on new or wet concrete (under 28 days old, or with a residual moisture content of 6% or higher).
  • Do not apply below 7°C or expose to freezing conditions; temperatures below 20°C slow curing and drying times.
  • Do not expose to chemicals, wash, or allow water to rest on the surface until 7 days after application.
  • Not UV stable – do not expose to prolonged sunlight, as it will discolour.
  • Allow car tyres to cool before parking on the surface for 24 hours after application.
  • Wear suitable PPE such as gloves and safety goggles. If the product gets on skin, wash off immediately with plenty of soap and water, and seek medical advice if discomfort occurs.

Specifications

Size
Kits covering up to 10m², 20m², 30m², 40m², 50m², 60m² or 80m² (1 coat primer + 2 coats paint)
Appearance
Primer clear, semi-gloss | Paint professional high gloss
Composition
100% solids, low VOC, solvent free
Substrates
Bare concrete, wood, screeds, steel
Product Components
Primer and paint each Resin (Part A) + Activator (Part B)
Typical Installations
Garages, basements, factories, storage areas
Re-coat/Foot-traffic Time (at 20°C)
Primer 3 hours | Paint 2.5 hours
Drying Time (at 20°C)
Primer 2.5 hours (touch dry) | Paint 10-12 hours
Pot Life
Primer 15 minutes at 20°C | Paint 20 minutes
Working Life
Primer 25 minutes | Paint 30 minutes
Paint Thickness
250 microns per coat
Paint Consumption Rate
0.25-0.30kg/m² (coverage up to 4m²/kg)
Primer Consumption Rate
0.2-0.3kg/m² (coverage up to 4m²/kg)
Minimum Temperature
7°C
Application Tools
Rollers, brushes
Usage Location
Interior
Shelf Life
12 months
Storage Temperature
10 - 25°C
Colours
Mid Grey (Silver Grey), Dark Grey (Slate Grey), Cobalt Blue, Sky Blue, Leaf Green, Fern Green, Tomato Red, Jet Black

Quote request

Get a quote for this product

Fast Cure Epoxy Garage Floor Paint Kit - Primer + 2 Coats, 10m² to 80m²Mid Grey (Silver Grey) / Kit | Coverage up to 10m² (1 coat primer + 2 coats paint)

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy