Liquid Damp Proof Membrane for Walls and Floors

Damp Proofing

Liquid Damp Proof Membrane for Floors & Walls - 1L, 5L or 22.5L

Single-pack liquid damp proof membrane for floors and walls, available in 1 litre, 5 litre and 22.5 litre sizes.

SKU RCD291

£53.98 incl. VAT

Key features

  • Seamless, flexible waterproof barrier
  • Versatile – for floors, walls and foundations
  • DIY friendly, single-pack product
  • Solvent free, low odour and VOC free
  • Great base for screeds, plaster and other finishes
Size: 1 Litre | Coverage approx. 2m² per litre per coat

Product details

Product description

A simple, reliable way to block rising damp, ground moisture and vapour in walls and floors. Designed for renovation projects, this brush or roller-applied liquid membrane forms a flexible, seamless waterproof barrier that gives you a clean, dry, stable base to build on – so whether you are plastering, tiling, laying screed or painting, moisture stays locked out and your finishes last.

It is suitable for concrete floors and ground slabs, brick walls, timber surfaces, retaining walls, bridge abutments and foundations, and for treating damp walls inside and out. It can also be used as an adhesive for wood blocks, cork tiles and polystyrene, and to provide a key for plaster on difficult surfaces. Once cured it must be covered with screed, plaster, tiles, wallpaper or resin flooring – it is not designed to be left as an exposed surface.

Coverage
  • General coverage: approx. 2m² per litre per coat
  • Floors (sandwich construction, severe damp): approx. 1m² per litre per coat
  • Priming (surface treatment on existing floors): dilute 1 part DPM with 6 parts clean cold water and apply at approx. 7.5m² per litre
  • Plaster key coats: 2 thin coats at approx. 4.5m² per litre each
  • Wood blocks (adhesive use): approx. 0.8m² per litre

Coverage varies with substrate porosity and application method. Always make sure coverage is full and continuous for effective damp proofing.

Preparation

All substrates must be clean, sound and stable, and free from dust, dirt, grease, oil, laitance and loose material. Remove any existing coatings or weak surface layers. The membrane can go onto damp surfaces, but not onto waterlogged ones or those with standing water. Lightly dampen porous or very dry substrates with clean water just before application to help adhesion. Fill cracks, voids and surface defects with a suitable repair material and let it cure first. On exterior masonry, level uneven surfaces with cement mortar before applying. Stir thoroughly before use.

Application
  • Floors: apply two full coats by brush or roller, working each coat evenly for complete coverage. Where moisture levels are high, or if you are overcoating with screeds or resin systems, sand-blind the second coat with clean, dry sand while it is still tacky to give a key for screeds, tiles or resin primers. Once dry, finish with screed, tiles or epoxy floor paint; before using epoxy floor paint, an oil tolerant epoxy primer is advised.
  • Walls: apply two to three coats depending on how severe the damp is, applying each coat evenly by brush or roller for full coverage. External walls and retaining structures may need extra coats. Replaster or line internal walls once the membrane has fully cured. Most wall finishes will adhere without any additional mechanical key.
Cure Times
  • Touch dry: approx. 4 hours
  • Full cure: approx. 24 hours (varies with site conditions)
  • Plastering or backfilling: allow at least 48 hours
Please Note
  • This is not a wearing surface and must always be covered with a suitable finish, never left exposed as a decorative or wearing finish.
  • Do not apply to waterlogged surfaces or in wet weather, and protect freshly applied surfaces from rain until dry.
  • Ensure good ventilation when working indoors and avoid inhaling vapours in poorly ventilated areas.
  • Wear suitable protective gloves and clothing and avoid contact with skin and eyes. Wash splashes off immediately with soap and water; if it gets in the eyes, rinse straight away with plenty of clean water and seek medical advice.
  • Do not ingest and keep out of reach of children.
  • Contain spills with absorbent material and dispose of waste in line with local regulations.

Specifications

Size
1 Litre, 5 Litres, 22.5 Litres
Appearance
Dark brown, dries black
Touch Dry
4 hours
Full Drying / Cure Time
Up to 24 hours
Before Plastering or Backfilling
Allow at least 48 hours
VOC Content
0g/L
Solids Content
>52%
Shelf Life
12 months
Components
Single pack
Application Tools
Brush or roller
Coverage
Approx. 2m² per litre per coat

Quote request

Get a quote for this product

Liquid Damp Proof Membrane for Floors & Walls - 1L, 5L or 22.5L1 Litre | Coverage approx. 2m² per litre per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy