20 x 380ml DPC Injection Cream Kit

Damp Proofing

DPC Injection Cream Kit 20 x 380ml - Large Project Rising Damp Kit

Large-project BBA-approved rising damp kit with twenty 380ml DPC injection cream cartridges, a cartridge gun, two extendable nozzles and a 12mm SDS drill bit.

SKU RCD112

£344.90 incl. VAT

Key features

  • 20 x 380ml cartridges – large project kit
  • Trusted protection against rising damp
  • Fast, low-pressure injection system
  • Solvent-free and environmentally friendly
  • Effective even in saturated walls
Size: 20 x 380ml Kit | Coverage up to 3.5 linear m per cartridge (115mm wall)

Product details

Product description

Supplied with twenty cartridges for large-scale projects, this BBA-approved rising damp treatment is designed for efficiency, creating a durable new damp proof course in walls of various constructions, including those with high moisture levels. The low-pressure application gives quick, clean installation, while the solvent-free formula is a safe, eco-friendly solution with long-lasting protection. The cream penetrates deep into the substrate while keeping application clean and straightforward, forming a durable horizontal barrier against moisture and soil salts that permanently halts rising damp, and buying in bulk gives both convenience and cost savings.

Advantages of DPC cream injection: over the last five decades chemical DPC injection has transformed the damp proofing industry as a viable alternative to traditional physical DPC installation, offering a quick, cost-effective, safer and more efficient rising damp treatment.

  • The cream's unique formula turns to liquid for superior depth of penetration.
  • Gives lasting damp resistance, remaining effective for as long as the mortar stays intact.
  • Installation is quick and tidy – the cream's consistency and low-pressure delivery minimise spillage and allow precise application.
  • Helps save energy costs by tackling rising damp, which reduces heat loss through damp walls.
Kit Contents
Coverage

Coverage per 380ml cartridge at various wall thicknesses:

Wall Thickness Coverage for 380ml Cartridge
115mm 3.5 Linear Metres (at a depth of 100mm)
230mm 1.75 Linear Metres (at a depth of 210mm)
345mm 1.15 Linear Metres (at a depth of 320mm)
460mm 0.875 Linear Metres (at a depth of 430mm)
Preparation
  • Identify any areas of excessive water ingress, fixing or adding drains as needed.
  • Strip skirting, fittings and wall finishes to expose the DPC line, removing salt-contaminated plaster up to 300mm above the damp level.
  • Inspect floor timbers for fungal damage and treat or replace them if necessary.
  • Clear any obstructions from wall cavities.
Application
  1. Choose a mortar joint at least 150mm above external ground level, or next to the internal floor level for solid floors, making sure the internal and external DPCs align.
  2. Drill 12mm diameter holes horizontally into the mortar joint, no more than 100mm apart, to a depth 20mm short of the wall thickness.
  3. Clear drilling debris from the holes with a vacuum or borehole blower.
  4. Cut the top of the cartridge for the cream to flow, attach the nozzle (and an extension tube if needed) and load into the cartridge gun.
  5. Inject the cream into each hole, starting at the back and slowly withdrawing the nozzle as the hole fills, stopping about 10mm from the face of the hole.

Plugging: on external wall faces, drill holes can be re-pointed with a matched mortar or plugged with DPC Injection Plugs (available in a choice of 2 colours). On internal faces the holes can be left open, with the plaster stopped short of the DPC.

Specifications

Size
20 x 380ml cartridge kit
Kit Contents
20 x 380ml DPC injection cream cartridges, 1 x cartridge gun, 2 x extendable nozzles, 1 x 12mm SDS drill bit
Approval
BBA approved
Formula
Solvent-free
Application
Low-pressure injection
Injection Holes
12mm diameter, max. 100mm apart, at least 150mm above external ground level
Coverage (115mm wall)
3.5 linear metres per 380ml cartridge (drilled 100mm deep)

Quote request

Get a quote for this product

DPC Injection Cream Kit 20 x 380ml - Large Project Rising Damp Kit

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy