2.5L Anti-Condensation Paint Water-Based 10-12.5m² Coverage

Damp Proofing

Anti-Condensation Paint 2.5L or 5L - White with Glass Microbeads

White, water-based anti-condensation paint with hollow glass microbeads, in 2.5 litre and 5 litre tubs covering 10-12.5m² and 20-25m² per coat.

SKU RCD238

£75.34 incl. VAT

Key features

  • Walls resist condensation 60% longer for enhanced protection
  • Retains efficacy even when applied under paint and wallpaper
  • Inhibits black mould and harmful fungi formation effectively
  • Environmentally friendly with antibacterial properties for safer use
Size: 2.5 Litres | Coverage 10-12.5m² per coat

Product details

Product description

Engineered to reduce condensation, this water-based styrene copolymer dispersion paint contains hollow glass microbeads that reflect ambient thermal energy away from the wall, repelling warm air back into the room. This raises the internal wall temperature and shifts the dew point, delaying condensation formation by up to 60%, preventing moisture building up on the wall and so reducing mould growth – robust protection against dampness and mould.

The 50µm microbeads have a crush strength of 500psi. The paint keeps working even when painted over or wallpapered, giving design flexibility without losing its protective benefits, and can be used as an undercoat before a coloured overcoat or wallpaper – though for best results it should be the final layer. It is designed for kitchens, bathrooms, utility rooms, cold walls and ceilings, and industrial spaces where condensation is more likely. It is suitable for metal and plastic surfaces as well as existing paint, wallpaper, plaster, brick and concrete; a preliminary test application is always advised to make sure the results meet your expectations.

Coverage
  • 2.5L: 10-12.5m²
  • 5L: 20-25m²

Coverage rates are per coat and depend on the porosity of the surface; in most cases 2 coats are advised.

Preparation

Cover non-target surfaces with dust sheets. Make sure the surface is clear of mould and fungus by cleaning affected areas with Mould Wash Spray and letting it dry completely. Remove loose paint, damaged wallpaper, grease, dirt, oil stains and any other finishes, and fill any cracks, allowing the filler to dry fully. Lightly sand glossy surfaces with abrasive paper while wearing a face mask, gloves and safety glasses. If necessary, apply a suitable primer or sealer – especially on new porous plaster, wood or bare metal – and let it dry completely. New plasterwork should be left to dry for 7-14 days before painting.

Application
  1. Make sure the area is well ventilated, then stir the paint gently and thoroughly by hand until it is completely smooth and the glass beads are evenly spread. Do not use mechanical mixers such as a drill and paddle, as these could damage the microbeads.
  2. Apply the first coat with a brush or medium pile roller, starting at a corner of the area and working inwards. Do not apply too thickly, to avoid a rough, textured finish; a foam roller gives a smoother appearance.
  3. Leave to dry for 2 to 4 hours.
  4. Apply the second coat (two coats are recommended). Lightly sand to even out any uneven spots or roughness.
Useful Information
  • Tools, brushes and rollers can be washed with warm, soapy water once the project is complete.
Please Note
  • Do not apply below 5°C or above 30°C, or on frozen surfaces.
  • Store in cool, dry conditions away from direct sunlight.
  • Wear appropriate PPE such as gloves and protective safety goggles. If in contact with skin, wash off immediately with plenty of soap and water. If swallowed, immediately call a poison centre or doctor. If in eyes, rinse cautiously with water for several minutes, removing contact lenses if present and easy to do, and continue rinsing. Seek medical advice if discomfort occurs.

Specifications

Size
2.5 Litres, 5 Litres
Colour
White
Composition
Styrene copolymer dispersion, water-based paint with hollow glass microbeads
Microbead Size
50µm
Microbead Crush Strength
500psi
Mixed Density
0.77kg/m³
Coverage
2.5L 10-12.5m², 5L 20-25m² per coat
Number of Coats
Two
Drying Time
2-4 hours (temperature dependent)
Application Temperature
5°C to 30°C
Shelf Life
12 Months

Quote request

Get a quote for this product

Anti-Condensation Paint 2.5L or 5L - White with Glass Microbeads2.5 Litres | Coverage 10-12.5m² per coat

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy