8mm Mesh Membrane 20m² Waterproofing Solution

Waterproof Membranes & Drainage

8mm Damp Proof Mesh Membrane Roll - 20m² or 40m²

8mm studded mesh membrane for waterproofing damp walls, supplied in 2m wide rolls covering 20m² or 40m².

SKU RCD287

£283.24 incl. VAT

Key features

  • 20m² or 40m² mesh membrane roll
  • Heavy-duty 8mm stud design
  • Ready for render or plasterboard
  • Long-lasting – up to 50-year lifespan
  • Tough against moisture, salt, chemical and contaminant damage
  • Withstands high pressure and impacts
  • Trusted by trade and DIYers
Size: W 2m x L 10m | Coverage 20m² | 8mm Stud Height

Product details

Product description

This durable waterproofing membrane protects walls in basements, cellars and other damp-prone areas. A strong 8mm stud profile and integrated mesh layer create a reliable base for direct finishes such as render or plasterboard.

It is a translucent membrane made from high-quality 0.65mm high-density polyethylene, designed for damp proofing walls, floors and ceilings in new and existing buildings. It can be used above or below ground on contaminated or damp backgrounds and supports dry lining or flooring systems, and it is approved for Type C (drained protection) construction to BS 8102:2022. Engineered to be one of the toughest, most robust membranes available, it has a mesh welded to its surface for direct rendering, mortar or dot and dab finishes, so it copes easily with high pressure, impacts and everyday site damage. Its square 8mm studs handle corner detailing and surface irregularities well, making it an excellent substrate for lime mortars, renders and plasters. As with all damp proofing projects, it should be integrated with perimeter drainage and sump pump systems.

Installation

Fix the membrane to the wall with plaster plugs or brick plugs. Before hammering each plug into place, seal it by fitting a sealing washer or wrapping butyl rope firmly around the plug head to make a waterproof seal.

  1. Clean the base to get the smoothest surface possible, removing any damaged, loose or crumbling plaster.
  2. Trim the membrane to size with a sharp blade or scissors.
  3. Fix the membrane to the surface with plugs, mesh side facing out. It can be installed horizontally or vertically.

Use approximately 15 plugs per square metre, with no plug more than 250mm horizontally or vertically from the next. On curved or uneven surfaces, place the plugs closer together so the mesh does not sit loose from the wall.

Jointing: the membrane is highly flexible and moulds easily around corners. Alternatively, butt joint the edges and make them watertight with fleece overstrip.

Finishing
  • Plaster finish: finish with standard plastering techniques using lightweight plasters. Apply a first coat that fills the studs and covers the mesh, scratch it before it sets, then apply a second coat to a final thickness of 15mm.
  • Dry lining / dot and dab: apply conventional bonding plaster in dabs at least 8mm thick, covering at least 50% of the membrane (and of the board), for a dry surface ready for decoration. Once the plaster, dry lining or render is dry it can be painted or wallpapered in the usual way.
  • Floors: alternatively, a 65mm sand and cement screed may be laid. Normal decorating materials can go on as soon as the floor, screed or plaster is dry.
  • Keep atmospheric moisture below 70% RH during application, and do not lay impermeable floor finishes until screed moisture content is below 75% RH.
Please Note
  • Do not store or expose to freezing conditions or direct sunlight.
  • All drainage systems must be fully maintained throughout their lifetime.

Specifications

Size
W 2m x L 10m (20m²) or W 2m x L 20m (40m²) rolls
Composition
100% virgin HDPE, 0.65mm
Stud Height
8mm (square studs)
Total Weight
Approx. 500g/m²
Number of Studs
1710/m²
Colour
Transparent
Water Drainage Capacity
Approx. 5.3 l/s m
Air Volume Between Studs
Approx. 4.5 l/m²
Compressive Strength
180 kN/m²
Temperature Resistance
-30°C to +80°C
Chemical Properties
Chemical resistant
Physical Properties
Safe for drinking water
Fire Resistance
Class E
Lifespan
Up to 50 years
Standard
Approved for Type C (drained protection) to BS 8102:2022

Quote request

Get a quote for this product

8mm Damp Proof Mesh Membrane Roll - 20m² or 40m²W 2m x L 10m | Coverage 20m² | 8mm Stud Height

We only use your details to reply to this request. See our privacy policy.

Frequently asked questions

What is the return policy?

You can return unused, unopened items in their original sealed packaging within 14 days of delivery, with no restocking fee. Contact us first to arrange the return. You pay return postage if you've changed your mind, and we pay if the item is faulty, damaged or incorrect. Refunds go to your original payment method within 5 working days of us receiving your return. Products made, mixed or tinted to your specification can't be returned unless they're faulty. Full Return & Refund Policy

When will I get my order?

Orders are dispatched within 1–2 working days. Delivery then takes 2–4 working days after dispatch, so the total estimated delivery time is 3–6 working days from order.

Orders placed before 2pm (UK time) on a working day are processed the same day. Orders placed after 2pm, at weekends or on UK bank holidays are processed from the next working day. Working days are Monday to Friday, excluding UK bank holidays.

 Full Shipping Policy

Which payment methods do you accept?

We accept Visa, Mastercard, Maestro, American Express, Diners Club, Discover and UnionPay. You can also pay with Apple Pay, Google Pay, Shop Pay, Klarna or a Resin Coatings Direct gift voucher. Payment is taken in full when you order, through Shopify's secure checkout, and all prices are in GBP including VAT. Full Payment Policy

How much does shipping cost?

UK delivery is a flat £9.99 per order, including VAT, for any order size and any UK address. The charge is shown at checkout before you pay, and nothing else is added. We deliver to the UK only. Full Shipping Policy