{"product_id":"8mm-mesh-membrane-20m-waterproofing-solution","title":"8mm Damp Proof Mesh Membrane Roll - 20m² or 40m²","description":"\u003cp\u003e\u003cstrong\u003e8mm studded mesh membrane for waterproofing damp walls, supplied in 2m wide rolls covering 20m² or 40m².\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis durable waterproofing membrane protects walls in basements, cellars and other damp-prone areas. A strong 8mm stud profile and integrated mesh layer create a reliable base for direct finishes such as render or plasterboard.\u003c\/p\u003e\u003cp\u003eIt is a translucent membrane made from high-quality 0.65mm high-density polyethylene, designed for damp proofing walls, floors and ceilings in new and existing buildings. It can be used above or below ground on contaminated or damp backgrounds and supports dry lining or flooring systems, and it is approved for Type C (drained protection) construction to BS 8102:2022. Engineered to be one of the toughest, most robust membranes available, it has a mesh welded to its surface for direct rendering, mortar or dot and dab finishes, so it copes easily with high pressure, impacts and everyday site damage. Its square 8mm studs handle corner detailing and surface irregularities well, making it an excellent substrate for lime mortars, renders and plasters. As with all damp proofing projects, it should be integrated with perimeter drainage and \u003ca href=\"\/products\/octagonal-sump-pump-system-240v-with-high-water-alarm\"\u003esump pump systems\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: W 2m x L 10m (20m²) or W 2m x L 20m (40m²) rolls\u003c\/li\u003e\n\u003cli\u003eComposition: 100% virgin HDPE, 0.65mm\u003c\/li\u003e\n\u003cli\u003eStud Height: 8mm (square studs)\u003c\/li\u003e\n\u003cli\u003eTotal Weight: Approx. 500g\/m²\u003c\/li\u003e\n\u003cli\u003eNumber of Studs: 1710\/m²\u003c\/li\u003e\n\u003cli\u003eColour: Transparent\u003c\/li\u003e\n\u003cli\u003eWater Drainage Capacity: Approx. 5.3 l\/s m\u003c\/li\u003e\n\u003cli\u003eAir Volume Between Studs: Approx. 4.5 l\/m²\u003c\/li\u003e\n\u003cli\u003eCompressive Strength: 180 kN\/m²\u003c\/li\u003e\n\u003cli\u003eTemperature Resistance: -30°C to +80°C\u003c\/li\u003e\n\u003cli\u003eChemical Properties: Chemical resistant\u003c\/li\u003e\n\u003cli\u003ePhysical Properties: Safe for drinking water\u003c\/li\u003e\n\u003cli\u003eFire Resistance: Class E\u003c\/li\u003e\n\u003cli\u003eLifespan: Up to 50 years\u003c\/li\u003e\n\u003cli\u003eStandard: Approved for Type C (drained protection) to BS 8102:2022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20m² or 40m² mesh membrane roll\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 8mm stud design\u003c\/li\u003e\n\u003cli\u003eReady for render or plasterboard\u003c\/li\u003e\n\u003cli\u003eLong-lasting – up to 50-year lifespan\u003c\/li\u003e\n\u003cli\u003eTough against moisture, salt, chemical and contaminant damage\u003c\/li\u003e\n\u003cli\u003eWithstands high pressure and impacts\u003c\/li\u003e\n\u003cli\u003eTrusted by trade and DIYers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eFix the membrane to the wall with \u003ca href=\"\/products\/60mm-plaster-plugs-for-membrane-fixing\"\u003eplaster plugs\u003c\/a\u003e or \u003ca href=\"\/products\/10mm-brick-plug-for-waterproofing-membranes\"\u003ebrick plugs\u003c\/a\u003e. Before hammering each plug into place, seal it by fitting a \u003ca href=\"\/products\/sealing-washers-100-pack-for-waterproofing-applications\"\u003esealing washer\u003c\/a\u003e or wrapping \u003ca href=\"\/products\/10mm-butyl-rope-for-waterproof-sealing\"\u003ebutyl rope\u003c\/a\u003e firmly around the plug head to make a waterproof seal.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean the base to get the smoothest surface possible, removing any damaged, loose or crumbling plaster.\u003c\/li\u003e\n\u003cli\u003eTrim the membrane to size with a sharp blade or scissors.\u003c\/li\u003e\n\u003cli\u003eFix the membrane to the surface with plugs, mesh side facing out. It can be installed horizontally or vertically.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eUse approximately 15 plugs per square metre, with no plug more than 250mm horizontally or vertically from the next. On curved or uneven surfaces, place the plugs closer together so the mesh does not sit loose from the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJointing:\u003c\/strong\u003e the membrane is highly flexible and moulds easily around corners. Alternatively, butt joint the edges and make them watertight with \u003ca href=\"\/products\/115mm-fleece-overstrip-for-membrane-applications\"\u003efleece overstrip\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eFinishing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaster finish:\u003c\/strong\u003e finish with standard plastering techniques using lightweight plasters. Apply a first coat that fills the studs and covers the mesh, scratch it before it sets, then apply a second coat to a final thickness of 15mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry lining \/ dot and dab:\u003c\/strong\u003e apply conventional bonding plaster in dabs at least 8mm thick, covering at least 50% of the membrane (and of the board), for a dry surface ready for decoration. Once the plaster, dry lining or render is dry it can be painted or wallpapered in the usual way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloors:\u003c\/strong\u003e alternatively, a 65mm sand and cement screed may be laid. Normal decorating materials can go on as soon as the floor, screed or plaster is dry.\u003c\/li\u003e\n\u003cli\u003eKeep atmospheric moisture below 70% RH during application, and do not lay impermeable floor finishes until screed moisture content is below 75% RH.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDo not store or expose to freezing conditions or direct sunlight.\u003c\/li\u003e\n\u003cli\u003eAll drainage systems must be fully maintained throughout their lifetime.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Resin Coatings Direct","offers":[{"title":"W 2m x L 10m | Coverage 20m² | 8mm Stud Height","offer_id":58122223518078,"sku":"RCD287","price":283.24,"currency_code":"GBP","in_stock":true},{"title":"W 2m x L 20m | Coverage 40m² | 8mm Stud Height","offer_id":58122223550846,"sku":"RCD288","price":532.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/9806\/7070\/files\/a88f4d227c0cdd1b1cbc4ffa7868f32d.jpg?v=1790656368","url":"https:\/\/resincoatingsdirect.co.uk\/products\/8mm-mesh-membrane-20m-waterproofing-solution","provider":"Resin Coatings Direct","version":"1.0","type":"link"}