{"product_id":"20kg-renovation-plaster-bucket-lime-perlite-mix","title":"Renovation Plaster 20kg Bucket - Lightweight Perlite Plaster for Damp Walls","description":"\u003cp\u003e\u003cstrong\u003e20kg bucket of lightweight, fibre-reinforced cement-based renovation plaster with perlite, covering up to 3m² at 10mm.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis premium, lightweight, pre-mixed cement-based plaster is enhanced with perlite and designed to combat dampness in the walls of older buildings. It can be applied shortly after a new DPC is inserted, or used together with our \u003ca href=\"\/products\/20kg-cement-based-tanking-slurry-for-cellar-basement-waterproofing\"\u003eCement-Based Tanking Slurry\u003c\/a\u003e. For larger renovation projects it is also available as a \u003ca href=\"\/products\/20kg-renovation-plaster-lightweight-waterproofing-solution\"\u003ebulk buy\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIt replicates the properties of a traditional 1:1:6 cement:lime:sand mortar, with perlite as a lightweight aggregate substitute, so it is easy to apply while keeping structural integrity. Its breathable composition suits areas affected by damp or flooding, letting walls dry naturally. Waterproofing and salt-inhibiting additives reduce efflorescence and pattern staining, the lime raises alkalinity to inhibit mould and prevent rust on metal lathing and conduits, and man-made fibres reduce shrinkage and improve flexural strength – ideal for restoration and new construction. Its thermal insulation also reduces condensation on internal walls and in basements for a more stable, dry environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 20kg bucket\u003c\/li\u003e\n\u003cli\u003eAppearance: Light grey, cementitious powder\u003c\/li\u003e\n\u003cli\u003eCoverage: Up to 3m² at 10mm depth\u003c\/li\u003e\n\u003cli\u003eWater: 9-11 litres per 20kg\u003c\/li\u003e\n\u003cli\u003eCoat Thickness: 10-15mm per coat; total no more than 25mm\u003c\/li\u003e\n\u003cli\u003eTime Between Coats: At least 24 hours\u003c\/li\u003e\n\u003cli\u003eDry Powder Density: 600 kg\/m³\u003c\/li\u003e\n\u003cli\u003eDensity Air Dried: 800 kg\/m³\u003c\/li\u003e\n\u003cli\u003eDensity Oven Dried: 725 kg\/m³\u003c\/li\u003e\n\u003cli\u003eCompressive Strength at 28 Days: 3.0 N\/mm²\u003c\/li\u003e\n\u003cli\u003eFlexural Strength at 28 Days: 1.4 N\/mm²\u003c\/li\u003e\n\u003cli\u003eModulus of Elasticity: 2,100 N\/mm²\u003c\/li\u003e\n\u003cli\u003eThermal Conductivity (k) at 0% Moisture: 0.13 W\/m°C\u003c\/li\u003e\n\u003cli\u003eThermal Conductivity (k) at 3% Moisture: 0.21 W\/m°C\u003c\/li\u003e\n\u003cli\u003eThermal Resistance (R) at 13mm, 3% Moisture: 0.058 m²°C\/W\u003c\/li\u003e\n\u003cli\u003eApplication Temperature: 5°C to 25°C\u003c\/li\u003e\n\u003cli\u003eShelf Life: 6 months – unopened, undamaged and stored correctly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFibre-reinforced to prevent cracking, perlite-enhanced for thermal insulation\u003c\/li\u003e\n\u003cli\u003eMinimises the risk of condensation, preventing black mould\u003c\/li\u003e\n\u003cli\u003eBlocks dampness and the transfer of ground salts\u003c\/li\u003e\n\u003cli\u003eUser-friendly: lightweight and pre-mixed for consistent quality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eA 20kg unit covers up to 3m² at a depth of 10mm. Rates also depend on the porosity of the surface.\u003c\/p\u003e\u003ch3\u003ePreparation\u003c\/h3\u003e\u003cp\u003eMake sure all surfaces are clean, stable and free from loose material, dust, laitance or old coatings, exposing the brickwork, masonry or concrete beneath. Remove all traces of old gypsum plaster and any organic matter, remove embedded objects such as nails or timber fixings, rake out loose joints to 20mm, clean out voids and prepare cutting points for fixtures. Smooth surfaces can be roughened to improve adhesion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePriming:\u003c\/strong\u003e prime high-suction areas with our \u003ca href=\"\/products\/sbr-additive-for-enhanced-adhesion-and-water-resistance\"\u003eSBR Additive\u003c\/a\u003e mixed 1:1 with clean water by volume, applied by roller, brush or spray, and wait about 30 minutes until tacky – or wet the surface thoroughly instead. Surfaces heavily contaminated with salts may need extra treatment with our \u003ca href=\"\/products\/5l-salt-inhibitor-primer-for-waterproofing-systems\"\u003eSalt Inhibitor Primer\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eMixing \u0026amp; Application\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePut 9-11 litres of clean water into a mixing bucket.\u003c\/li\u003e\n\u003cli\u003eUsing an \u003ca href=\"\/products\/1800w-electric-mortar-drill-paddle-mixer\"\u003eElectric Mortar Drill \u0026amp; Paddle\u003c\/a\u003e at low speed to reduce dust, gradually add the powder. When hand mixing, add half the contents to the water and mix well, then add the rest, adding more water if needed.\u003c\/li\u003e\n\u003cli\u003eOnce all the powder is in, increase the speed and mix for about 1-3 minutes to a uniform, lump-free plaster. Machine mixing must not exceed 5 minutes, as this compromises the thermal properties.\u003c\/li\u003e\n\u003cli\u003eLet the mix stand for a few minutes before use – it makes application easier.\u003c\/li\u003e\n\u003cli\u003eApply with a plastering trowel at 10-15mm per coat. For best results apply two coats at least 24 hours apart, keeping the total thickness to no more than 25mm.\u003c\/li\u003e\n\u003cli\u003eBetween coats and before a finish coat, lightly comb or scratch the surface to create a mechanical key.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eWear appropriate PPE such as gloves and safety goggles. Causes skin irritation and serious eye damage, may cause an allergic skin reaction or respiratory irritation, and is harmful if swallowed – avoid breathing dust. If the product contacts skin, wash it off immediately with plenty of soap and water. If swallowed, immediately call a poison centre or doctor. If in eyes, rinse cautiously with water for several minutes, removing contact lenses if present and easy to do, and continue rinsing. Keep out of reach of children, and store tightly sealed in cool, dry conditions.\u003c\/p\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDo not apply below 5°C or above 25°C, or on frozen or frost-filled surfaces.\u003c\/li\u003e\n\u003cli\u003eThis product is not waterproof; its alkalinity prevents soluble salt passage and mould growth. A damp proof course (DPC) is recommended to stop further water entry.\u003c\/li\u003e\n\u003cli\u003eNot recommended on plasterboard, paper-faced boards, or surfaces with bituminous coatings or traces of gypsum.\u003c\/li\u003e\n\u003cli\u003eSweep up dry powder and dispose of it in accordance with the local authority.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Resin Coatings Direct","offers":[{"title":"20kg | Coverage up to 3m² at 10mm Thickness","offer_id":58122242130302,"sku":"RCD818","price":101.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/9806\/7070\/files\/0dfc48b949f88eaee6cf2aafde373a81.jpg?v=1790656455","url":"https:\/\/resincoatingsdirect.co.uk\/products\/20kg-renovation-plaster-bucket-lime-perlite-mix","provider":"Resin Coatings Direct","version":"1.0","type":"link"}